1:48 Sd.Kfz.232 front bumper/spoiler (Tamiya)

A photo-etched front bumper and spoiler for the Sd.Kfz.232 in 1:48 scale is an accessory set for a plastic kit you have already bought, not a model. Thin metal replaces an oversized plastic part and gives the nose of the armored car the correctly slim profile.

Scale1:48
Manufacturer Hauler
Product EAN8591111780643

Responsibility details are not available.

7.16 €
5.92 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Sd.Kfz.232 - photo-etched front bumper and spoiler, 1:48 scale (Hauler)

A small but conspicuous modification from the Czech maker Hauler. The front bumper and the protective spoiler are among the most closely watched places on a model, because they are visible from every angle, and a plastic molding is always thicker, because of the injection technology, than the real sheet metal was. The photo-etched replacement has a real thickness and sharp edges. The set is meant solely for completing the Tamiya kit; in itself it is neither a kit nor a finished model.

The real subject

The Sd.Kfz.232 belonged to the family of German heavy armored cars with all eight wheels driven. It was the radio version of the reconnaissance car, equipped with a powerful transmitter and a frame antenna, with a 20 mm gun in a rotating turret. The cars served with reconnaissance detachments from the campaign in Poland through France and North Africa to the Eastern Front. The front part of the hull was protected by a sheet-metal bumper and a deflector, which turned the dirt away from the chassis.

Building and painting tips

Cut the original plastic part away and sand the area flush, so that the photo-etch sits down without a gap. Mark the bends out beforehand with a blunt needle along the engraved lines on the photo-etch and make them in one stroke - repeated bending tires the metal and the part cracks. Glue it on with super glue and polish the joint over once it has dried. Do not forget that thin metal will take only limited handling; mount the bumper at the end of the build therefore, ideally after the base shade has been sprayed. A scuffed edge on the bumper can be suggested by drybrushing with a metallic pigment.

Who the set is for

  • Builders of the German eight-wheeled armored car in 1:48 scale
  • Modelers who are bothered by the disproportionate thickness of the plastic bumper
  • Those who want to try working with photo-etch on a small, manageable part
  • Collectors building equipment for a display case with an emphasis on the silhouette of the nose

This is an accessory set for a kit you have already bought. It is supplied unpainted; the base kit, glue and paints are not included in the package, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

No. It is a photo-etched accessory set for a plastic kit you already have. In itself it holds no parts of the vehicle.

Yes, the photo-etched replacement is fitted in its place. Sand the area over once it has been cut away, so that the metal part sits down without a gap.

Make the bend in one stroke along the engraved lines and do not bend the sheet back. Repeated bending tires the metal and the part breaks.

Ideally at the end of the build, after the primer coat has been sprayed. Thin metal will take only limited handling.

Last seen

HaulerHLX483381:48

1:48 Sd.Kfz.232 front bumper/spoiler (Tamiya)

A photo-etched front bumper and spoiler for the Sd.Kfz.232 in 1:48 scale is an accessory set for a plastic kit you have already bought, not a model. Thin metal replaces an oversized plastic part and gives the nose of the armored car the correctly slim profile.
In stock
7.16 €
RB modelRB200L321:200

1:200 Retwizan

RB model 1:200 — turned metal barrels for the battleship Retvizan . An accessory that replaces the plastic barrels on a model.
In stock
11.96 €
1:48 F-16C Block 25 LooK-25 %Stock ClearanceFavorite
EduardED6442071:48

1:48 F-16C Block 25 LooK

1:48 F-16C Block 25 LööK is an Eduard accessory instrument panel set for a model of the F-16C multirole combat aircraft in 1:48 scale. It is not a kit.
6 leftof 8
9 €6.76 € You save 2.24 €
AiresAIR71341:72

1:72 German 20mm guns MG FF

Aires 1:72 German 20 mm MG FF cannons is a resin detail set for a faithful rendering of the MG FF aircraft cannon on aircraft models.
In stock
5.20 €
1:700 USS New Jersey BB-62-25 %Stock ClearanceFavorite
TamiyaTA316141:700

1:700 USS New Jersey BB-62

A plastic kit of the battleship USS New Jersey BB-62 in 1:700 scale from Tamiya (Waterline Series) — the American Iowa-class battleship.
Last one!of 2
31.56 €23.68 € You save 7.88 €
FujimiFU722981:72

1:72 JGSDF Light Armoured Vehicle

Fujimi 1:72 JGSDF Light Armoured Vehicle : a kit of the light armored vehicle of the Japan Ground Self-Defense Force in 1:72 scale.
In stock
23.56 €
GasPatch modelsGP19-722151:72

1:72 Marlin M1917 Early Type (2 Items)

Marlin M1917 Early Type 1:72 is a resin detail accessory from GasPatch models. According to the name the package contains two castings of the American aviation machine gun; it is not a kit.
In stock
5.96 €
Evolution MiniaturesEM350721:35

1:35 German Tank Crewman WW2

A resin figure kit of a German tank crewman of the Second World War in 1:35 scale from Evolution Miniatures. Meant to be assembled, painted and set into a diorama.
In stock
17.16 €
DK DecalsDK480211:48

1:48 Night Intruders

Night Intruders is a DK Decals sheet in 1:48 scale devoted to the British night intruder machines of the Second World War. It is a separate set of markings; a kit is not included.
In stock
11.16 €
KelikRSK35-00181:35

1:35 AH-64D APACHE INTERIOR 3D DECALS FOR TAKOM KIT

Colored relief elements for the cockpit of a model of the AH-64D Apache attack helicopter in 1:35 scale, intended according to the name for the Takom kit.
In stock
28.76 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.