QMT 1:32 Messerschmitt Bf 109E-3, E-4 and E-7 – wheel bay masks is a set of self-adhesive masks for painting the wheel bays of the early Bf 109 versions in 1:32 scale.
Responsibility details are not available.
Die-cut self-adhesive masks intended for painting the wheel bays of Messerschmitt Bf 109 fighters in the E-3, E-4 and E-7 versions in 1:32 scale. This is not a kit or parts but an aid that separates the color of the inside of the bay from the surrounding finish during spraying. The specific number of masks and the extent of the coverage are stated on the manufacturer's packaging.
The most common mistake in masking is not a badly placed mask but paint that gets under its edge. It takes only a mask that does not seat in a corner, and a blurred shadow appears under the edge, which is then hard to repair. Three things help: run a blunt tip along the whole edge after the mask is applied, spray from the edge toward the inside of the area, and do not start at full pressure right on the edge. An experienced trick is to spray a thin layer of the paint that lies under the mask across the edge first, or a clear coat; that seals the edge and any seepage is in the same shade, so it does not show.
The base has to be clean and degreased, otherwise the mask will not hold. Let the paint of the inside of the bay cure, and only then mask. Spray in thin coats so that no ridge you can feel appears at the edge, the kind a fingernail then catches on. The wing of the Bf 109 of the E series has shallower and simpler bays than the later versions, which makes every unclean transition on them show all the more.
The package contains masks only. The kit, the paints and the glue are not included in the delivery.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!