29.–30. 10. z technických důvodů zavřeno. / Closed 29–30 October for technical reasons.

1:32 North-American P-51D-15 Mustang interior

The Eduard 1:32 photo-etched set for the interior of the North American P-51D-15 Mustang works up the cockpit and the internal fit-out of a model. It is a detail accessory to a kit, not a model in its own right.

Scale1:32
Manufacturer Eduard
Product EAN8591111000000

Responsibility details are not available.

20 € 15 €
12.40 € without VAT
−25 % You save 5 €
6 pcs in stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

P-51D-15 Mustang 1:32 — a photo-etched set for the interior

This set from the Czech manufacturer Eduard holds parts in etched metal sheet intended for working up the internal sections of a model of the North American P-51D-15 Mustang fighter in 1:32 scale. The focus on the interior is given in the name itself — the set is therefore aimed at the cockpit and the internal fit-out, as against the exterior set of the same range. It is not a kit but an accessory to a model you already have.

The real subject

The P-51D is the most widespread version of the Mustang — a teardrop canopy, a cut-down rear fuselage decking and a supercharged V12 engine. The D-15 designation belongs to one of the production blocks of this version. The cockpit of the Mustang is comparatively tight and uncluttered, but in the large 1:32 scale practically all of it is visible with the canopy open, so injection-molded plastic with coarsely suggested instruments and harnesses is distracting there. That is exactly where photo-etched parts have the greatest effect.

Building and painting tips

Finish and paint the interior before you close the fuselage — once it is glued you will not reach into the cockpit again. Cut the parts off with a scalpel on a hard surface and make the folds on a bender or between two razor blades. Glue with cyanoacrylate glue applied with a pin; on larger areas a slow-setting glue helps, so that you have time to line the part up. Degrease the metal parts and go over them with a primer. Photo-etched safety harnesses look better if you bend them gently over a round object before gluing — a stiff, straight strap looks unnatural.

Who the set is for

  • modelers who want to display a model with the cockpit canopy open
  • builders looking for competition-level detail in the cockpit
  • more experienced buyers used to working with thin metal
  • anyone for whom instruments and harnesses suggested in injection-molded plastic are not enough

The set is an accessory to a kit, not a model in its own right. The kit, glue and paints are not included in the package, unless stated otherwise. Before you buy, check the match with the model you are building.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

Before the fuselage is closed. Once the halves are glued you will not get into the cockpit and some of the parts can no longer be fitted.

This one is aimed at the cockpit and the internal fit-out; the exterior version of the same range deals with the external sections of the model.

A sharp scalpel, tweezers and cyanoacrylate glue at the very least. A photo-etch bender makes the work markedly easier, but two razor blades will stand in for it.

They are not. The set holds photo-etched parts only; the kit and the paints are obtained separately.

Last seen

1:32 North-American P-51D-15 Mustang interior-25 %Stock ClearanceFavorite
EduardED329931:32

1:32 North-American P-51D-15 Mustang interior

The Eduard 1:32 photo-etched set for the interior of the North American P-51D-15 Mustang works up the cockpit and the internal fit-out of a model. It is a detail accessory to a kit, not a model in its own right.
6 left
20 €15 € You save 5 €
Aires/QuickboostQB721471:72

1:72 Focke Wulf Fw 190D-9 exhaust

The Quickboost exhaust for the Focke-Wulf Fw 190D-9 in 1:72 scale. A resin detail accessory of the Aires brand for a more faithful rendering of the exhaust system.
In stock
3.56 €
Voyager ModelPE351124A1:35

1:35 WWII German Pz.Kpfw.IV Ausf.F1(LateProduction)Basic(For TAMIYA 35374)

A Voyager Model photo-etched set for the Pz.Kpfw.IV Ausf.F1 of late production in 1:35 scale, cut for the Tamiya 35374 kit. An accessory to a plastic model, not a kit.
In stock
31.96 €
FujimiFU039701:24

1:24 Mitsubishi FTO GPX '94/GS

Fujimi 1:24 Mitsubishi FTO GPX 94/GS is a plastic kit of the Japanese sports coupe in the popular collector's scale.
In stock
26.76 €
EduardFE12781:48

1:48 Sukhoi Su-25 seatbelts STEEL

The 1:48 Sukhoi Su-25 steel seat belts (STEEL) are color-printed photo-etched Eduard belts in steel for a faithful cockpit on a model of the ground-attack aircraft. It is not a kit.
In stock
6.80 €
XtradecalX481091:48

1:48 RFC/RAF 100 Years of Shiny 2 Squadron

The 1:48 RFC/RAF 100 Years of Shiny 2 Squadron decal sheet from Xtradecal is devoted to the hundred-year history of British No. 2 Squadron. It contains standalone decals in 1:48 scale.
In stock
11.16 €
Quinta StudioQP480041:48

1:48 Blue rib tapes for Fokker Dr.(F)I-D.VII

Quinta Studio 1:48 Blue rib tapes for the Fokker Dr.I / D.VII are a set of colored 3D decals that faithfully reproduce the doped fabric tapes over the ribs on the wing covering.
In stock
10.36 €
1:24 Toyota Celica 1600GT Race Configuration-25 %Stock ClearanceFavorite
HasegawaHA212161:24

1:24 Toyota Celica 1600GT Race Configuration

Hasegawa 1:24 Toyota Celica 1600GT Race Configuration is an injection-molded plastic kit of the classic Japanese coupe in racing trim.
Last one!
35.96 €26.96 € You save 9 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.