1:35 GAZ-233014 TIGER Tinting film II. (MENG)

SX-Art 1:35 GAZ-233014 Tiger – tinting film II. is a pre-cut self-adhesive tinting film for the glazing of the Tiger armored car, cut for the kit from Meng. It is the second part of the series, not a painting mask.

Scale1:35
Manufacturer SX-Art
Product EAN8591111000000

Responsibility details are not available.

3.56 €
2.94 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

GAZ-233014 Tiger 1:35 — tinting film, part II.

A pre-cut self-adhesive tinting film in 1:35 scale for the glazing of the GAZ-233014 Tiger armored off-road car. It is neither a model nor a painting mask: the film is stuck onto the clear part and stays there, so the glazing gains a color cast without any spraying of tinted varnishes. The designation II. means the second part of the series of films for this vehicle — part I. is a separate item. The set is cut for the kit from Meng; a film of the same name for the Zvezda kit exists as well.

What is glazed on the Tiger

The tall boxy cab of the Tiger has flat windshield and side windows recessed into thick frames of the body and supplemented with smaller vision ports. It is precisely the small windows and vision ports that tend to be the most tiresome part of tinting — on a small area every uneven cast shows, and masking them with tape takes more work than the spraying itself. A pre-cut shape fits them exactly and the cast stays the same across the whole area, including the corners by the frame.

Fit and checking before sticking it down

Before you take the backing off the film, offer it up dry on the part and compare the cut with the outline of the glass and with the inner edge of the frame. The film is cut to one particular kit and on a flat pane the difference shows at once. Also check that you do not happen to be holding a part from the first part of the series — the shapes of the two parts differ only slightly. It is stuck on only once the model is finished, varnished and dry, on a degreased surface, working the pressure from the center out to the edges so that no air is left under the film.

Who the film is for

  • Builders of modern wheeled vehicles in 1:35 scale
  • Modelers who already have the first part of the films and want to finish the glazing
  • Anyone who does not want to tint glazing by spraying clear varnishes
  • Builders of the corresponding kit from Meng

This is an accessory for a kit. The model, paints and glue are not included in the package, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

Which panes of the glazing each part covers is stated by the manufacturer on the packaging. Both parts are separate items and the series is divided into two.

It is not. It is a tinting film that stays on the clear part and gives the glazing a color cast. The painting mask for the same vehicle is a separate item.

Do not count on it. The cut is made for the Meng kit; the version for the Zvezda kit is a separate product for exactly that reason.

Right at the end, on a finished and dry model. Varnish should no longer be sprayed over a film that has been stuck down, nor weathering products applied.

Last seen

SX-ArtSXA350481:35

1:35 GAZ-233014 TIGER Tinting film II. (MENG)

SX-Art 1:35 GAZ-233014 Tiger – tinting film II. is a pre-cut self-adhesive tinting film for the glazing of the Tiger armored car, cut for the kit from Meng. It is the second part of the series, not a painting mask.
In stock
3.56 €
VallejoVAL75023

WWII US Army in Europe and the Pacific by Javier Redondo (Spanish Version)

WWII US Army in Europe and the Pacific by Javier Redondo is a Vallejo modeling handbook on painting and weathering American equipment of the Second World War, in the Spanish language version.
In stock
25.96 €
1:48 Uh-34 Seahorse / Westland Wessex (NAVY Version) wheels set-25 %Stock ClearanceFavorite
ReskitRS48-00541:48

1:48 Uh-34 Seahorse / Westland Wessex (NAVY Version) wheels set

UH-34 Seahorse / Westland Wessex (NAVY) wheel set is a resin add-on set of landing gear wheels from Reskit in 1:48 scale. It is not a helicopter model but a detail accessory.
5 leftof 6
10.76 €8.08 € You save 2.68 €
Yamamoto Model PartsYMPTUN1361:24

1:24 Pop Up Knight Sports Type (for Tamiya Mazda RX-7 FD3S kits)

1:24 Pop Up Knight Sports Type are pop-up front headlights in the modification by the Japanese studio Knight Sports for a model of the Mazda RX-7 of the FD3S generation. Intended for the Tamiya kit.
In stock
8.76 €
AbrexC245-921401:43

1:43 Abrex Cararama - Zuendapp KS750 Motorbike - Dark Grey

Abrex Cararama 1:43 Zündapp KS 750 in dark gray is a finished collector's model of the motorcycle, not a kit.
In stock
12.80 €
J´s WorkPPA51681:35

Airbrush CAMO-MASK for 1/35 AMX13/75 Camouflage Scheme 2

Airbrush CAMO-MASK 1:35 AMX-13/75 Camouflage Scheme 2 is a self-adhesive masking set from Js Work for spraying the camouflage scheme of the French AMX-13/75 tank in 1:35 scale.
In stock
6.76 €
ReskitRSU35-00321:35

1:35 AH-1G Cobra main rotor with dust and debris deflector (sand shields) early version for ICM kit

Reskit 1:35 – AH-1G Cobra: main rotor with dust and debris deflectors (sand shields), the EARLY version, for the ICM kit is a 3D-printed detail accessory, not a kit . It replaces the original rotor head in plastic – the rotor blades are not included and are taken from the ICM kit .
In stock
20.76 €
AberABR72L541:72

1:72 German 50mm KwK39/1 L/60 Barrel for Sd.Kfz.234/2

1:72 metal gun barrel 50 mm KwK39/1 L/60 for the Sd.Kfz.234/2 is an accurately turned metal replacement for the plastic barrel from the manufacturer Aber. It is not a model but a refining accessory.
In stock
7.96 €
EduardED4810431:48

1:48 Junkers Ju-88C-6 exterior

Eduard 1:48 Junkers Ju-88C-6 exterior is a photo-etched set of exterior details for bringing out the surface of a plastic model, not a stand-alone kit.
In stock
8.52 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.