1:35 Jap.Army dummy sold.and howitzer-WWII 2fig.

1:35 Jap.Army dummy sold.and howitzer-WWII 2fig.

11.16 €
Add to Cart

1:35 Jap.Army dummy sold.and howitzer-WWII 2fig.

1:35 Japanese army, a dummy soldier and a howitzer, Second World War (2 figures) is a CMK resin set joining figures with an artillery element.

Scale1:35
Manufacturer CMK
Product EAN8591111000000

Responsibility details are not available.

11.16 €
9.22 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

1:35 Japanese army, a dummy soldier and a howitzer (CMK, 2 figures)

A resin set in 1:35 scale from the maker CMK. The name gives two figures and in one package joins them with a howitzer, which makes the set a small scene rather than stand-alone figures. For a modeler that means a different task from an ordinary figure set: the figures will not stand freely but will be tied to the artillery element, so they are arranged only according to it. The exact contents of the package are stated on the box.

The casting and assembly

The parts come on casting blocks, and on the artillery part they tend to be thin and easily broken. First wash everything in lukewarm water with detergent because of the mold release agent. Cut the blocks off with a fine-toothed saw a little way from the part and sand the remainder down, and scrape the parting line along the sides with the edge of a scalpel. Proceed in this order: first assemble and clean up the artillery part, and only then dry-fit the figures to it and adjust the contact surfaces of their hands and feet until they fit without being forced. The opposite order ends with a painted figure that does not reach the finished part. They are glued with cyanoacrylate glue, with a wire pin on larger joints. The whole practically cannot do without a base, as on a bare board it would fall apart into unrelated pieces.

Painting and tying the scene together

The combination of figures and an artillery element means three different surfaces side by side: metal, wood and fabric. Paint metal with a dark base and burnish the edges carefully, build wood up with glazes over a lighter undercoat so that the grain shows through, and keep the uniform in mild contrast with a thin glaze into the folds. Deal with the skin in three steps, that is a base, a brown glaze into the shadows and a fine highlight on the forehead and cheekbones; in 1:35 it is enough to suggest the eyes with a dark line under a magnifier. The most important step comes at the end: go over both the figures and the howitzer with the same earthy tint from the bottom up and finish them with one matte clear coat. A shared patina and a matching degree of sheen join separately painted pieces into one scene more reliably than an exact match of shades.

Who the set is for

  • Diorama makers who want a ready small scene instead of free-standing figures
  • Modelers with experience of resin and of gluing small parts
  • Anyone interested in painting three surfaces side by side: metal, wood and fabric
  • Those who are planning a base or a display case scene in 1:35 scale

The set is supplied unassembled and unpainted as resin castings. Glue, paints and a base are not included in the package, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

The name gives two figures and a howitzer. The detailed breakdown, that is the exact number of parts and the form of the artillery part, is stated on the box.

First assemble and clean up the artillery part, then dry-fit the figures to it and adjust the contact surfaces of their hands and feet. When the figures are glued first, they often fail to reach the finished part naturally.

Paint them separately with their own procedures and tie them together only at the end. The same earthy tint applied from the bottom up and one matte clear coat across the whole scene joins the surfaces more reliably than trying to match shades.

Practically not. The figures are tied to the artillery element, so without a shared base the whole falls apart into unrelated pieces. A small board with a worked surface, into which the figures are anchored with wire pins, is enough.

Last seen

CMKF352351:35

1:35 Jap.Army dummy sold.and howitzer-WWII 2fig.

1:35 Japanese army, a dummy soldier and a howitzer, Second World War (2 figures) is a CMK resin set joining figures with an artillery element.
In stock
11.16 €
DEF ModelDW300721:35

1:35 German Sd.Kfz 222/223 - Sagged Wheel Set (2) Early (For Tamiya)

1:35 Sd.Kfz. 222/223 sagged wheels (early version) is a resin set of wheels with realistically flattened tires for models of the German armored car in 1:35 scale. A detail accessory, not a model of the vehicle. Intended for the Tamiya kit.
In stock
19.96 €
1:32 Eurofighter Typhoon - exhaust nozzles (open, early type)-25 %Stock ClearanceFavorite
ReskitRSU32-00371:32

1:32 Eurofighter Typhoon - exhaust nozzles (open, early type)

Reskit 1:32 – exhaust nozzles for the Eurofighter Typhoon, open, early type replace the plastic parts of the rear of a model with a fine resin casting in the open position.
4 leftof 5
20.76 €15.56 € You save 5.20 €
Art ScaleASKD480821:48

1:48 F-84F Thunderstreak Decal Part 2 - Armee de l'Air

Art Scale, F-84F Thunderstreak part 2 (1:48) is a decal set with markings for machines of the French Air Force (Armée de l'Air).
In stock
11.96 €
Kits-WorldKW3D1240281:24

1:24 TRS Racing Nascar Superlite 6-Point Harness (Miami Blue)

The pastel Miami Blue shade on a six-point harness for a model seat at a reduction of 1:24. Printed in full color, with a raised texture for the strap.
In stock
11.16 €
ReskitRSU32-00391:32

1:32 Eurofighter Typhoon - exhaust nozzles (open, late type)

Reskit Eurofighter Typhoon – exhaust nozzles, open, late type (1:32) is a resin detail set of nozzles in the open position for models of this European fighter.
In stock
20.76 €
IBG modelsIBG725531:72

1:72 PZL P.24A/F Fighter In Turkish Service

1:72 PZL P.24A/F Fighter In Turkish Service is a plastic kit of the export PZL P.24 fighter in two production versions and in Turkish markings from IBG models.
In stock
11.96 €
CMKCMK75311:72

1:72 Fairey Barracuda Wheels or Special Hobby kits

CMK 1:72 Fairey Barracuda wheels is a resin detail set of replacement main landing gear wheels for models of this British aircraft.
In stock
5.96 €
1:48 CF-104 Late 3D-Printed & coloured Interior on decal paper (Kinetic)-25 %Stock ClearanceFavorite
Quinta StudioQD482261:48

1:48 CF-104 Late 3D-Printed & coloured Interior on decal paper (Kinetic)

Quinta Studio 1:48 CF-104 Late is a three-dimensional 3D decal of the interior for the late form of the Canadian Starfighter in 1:48 scale. The cockpit gets color and a raised relief without painting by hand.
4 leftof 5
13.56 €10.16 € You save 3.40 €
AML DecalsAMLA440011:144

1:144 Fieseler Fi-103A (V-1) with transport trailer

AML Fieseler Fi-103A (V-1) with transport trailer - a model of the famous flying bomb with a transport trailer in 1:144 scale.
In stock
9.96 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.