1:35 Krupp 12.8cm Pak 44 - Upgrade Set

An accessory set for a model of the Krupp 12.8 cm Pak 44 heavy anti-tank gun in 1:35 scale from the brand Great Wall Hobby. It is not a kit on its own but a set of parts with which the detail of an already built plastic model is refined.

Scale1:35
Manufacturer Great Wall Hobby
Product EAN8591111000000

Responsibility details are not available.

27.56 €
22.78 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Krupp 12.8 cm Pak 44, an accessory set in 1:35 scale (Great Wall Hobby)

The set serves to finish a plastic model of the Krupp 12.8 cm Pak 44 heavy anti-tank gun in 1:35 scale. It is not a complete kit, so the model of the gun itself has to be in hand. Accessory sets of this type take the place of parts that cannot be made fine enough in injection-molded plastic, typically thin sheet-metal items, brackets and fine mesh.

The real subject

The Krupp 12.8 cm Pak 44 was a German heavy anti-tank gun of the end of the Second World War. It grew out of the large-caliber concept and was one of the heaviest weapons of its category that could still be towed on a wheeled carriage. Given the weight and the dimensions it was built only in small numbers and its use remained limited. For a modeler it is interesting above all as a technically unusual piece with a massive gun carriage, which in 1:35 scale makes an impressive centerpiece of a display case or a diorama.

Building and painting tips

Install the set at the moment when you have the main parts of the model dry-fitted together but the surface not yet finished. The fine parts are glued with cyanoacrylate glue in the smallest possible amount, make the bends over a sharp edge or in a photo-etch bending tool, and never break them with tweezers at random. Degrease the whole model before painting and use a primer, because on a smooth metal or resin surface the paint would otherwise hold badly. Build the weathering up step by step, from a dark glaze in the recesses through a dry brush on the edges to pigments on the lower parts of the carriage.

Who the set is for

  • Modelers who build German artillery in 1:35 scale and want the maximum of detail
  • Builders of dioramas where the gun is the main object and is seen close up
  • More experienced modelers with experience of fine accessory parts
  • Competition models, where the accuracy of the small items is judged

The set holds accessory parts only. The base kit, glue and paints are not included in the package, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

No. It is an accessory set, which assumes that you already have the plastic model of the gun in 1:35 scale. On its own it is not a complete kit.

The make-up of the parts is given by the instructions in the package. Before buying, compare the contents of the set with what you want to improve on your model.

Accessory sets tend to be tied in shape to a particular plastic kit. So check that it matches the model you are building, ideally against the dimensions of the parts.

A sharp scalpel, tweezers and cyanoacrylate glue are enough. For the thin folded parts a photo-etch bending tool, or at least a metal ruler with a sharp edge, comes in handy.

Last seen

Great Wall HobbyGWHL3526T1:35

1:35 Krupp 12.8cm Pak 44 - Upgrade Set

An accessory set for a model of the Krupp 12.8 cm Pak 44 heavy anti-tank gun in 1:35 scale from the brand Great Wall Hobby. It is not a kit on its own but a set of parts with which the detail of an already built plastic model is refined.
In stock
27.56 €
OmaskOMKX48331:48

1:48 48 Mig-21F O-max set (for Eduard)

Omask MiG-21F O-max mask set (for Eduard) 1:48 is a set of painting masks for the MiG-21F kit. It is not a model: it serves for painting the frames cleanly and protecting the bays.
In stock
16.36 €
OmaskOMK540311:48

1:48 Avia B-35.1 mask (for Planet models)

Omask painting masks for the Avia B-35.1 in 1:48 are pre-cut self-adhesive masks for the canopy glazing for a clean spray of the glazing frames.
In stock
5.16 €
1:72 Russian Infantry Fighting Vehicle BMP-3
-10 %
Favorite
ZvezdaZV50791:72

1:72 Russian Infantry Fighting Vehicle BMP-3

An injection-molded plastic kit of the BMP-3 in 1:72 scale from Zvezda – the Russian infantry fighting vehicle.
In stock
29.16 €26.36 € You save 2.80 €
1:35 M4A3 76W HVSS EARLY TYPE UPGRADE SOLUTION SERIES-25 %Stock ClearanceFavorite
RYE FIELD MODELRM20261:35

1:35 M4A3 76W HVSS EARLY TYPE UPGRADE SOLUTION SERIES

1:35 M4A3 76W HVSS Early Type Upgrade Solution Series is a detail accessory set for raising the fidelity of a plastic model of the American medium tank in 1:35 scale from the maker Rye Field Model.
Last one!of 2
23.96 €17.96 € You save 6 €
Pimp My Miniatures16s-0191:16

1:16 Sd.Kfz 234 hub with the screws

A wheel hub with screws for the heavy armored car Sd.Kfz 234 in 1:16 scale . A small component that sharply renders the center of the wheel on a large-scale model.
In stock
9.16 €
AMTAMT12961:650

1:650 STAR TREK CLASSIC U.S.S. ENTERPRISE

A plastic kit of the starship U.S.S. Enterprise from the classic Star Trek series in 1:650 scale. Supplied unassembled and unpainted.
In stock
44.76 €
EduardED6443131:48

1:48 Fw-190A-4 LooKplus series

The combined detail set Fw 190A-4 LööKplus in 1:48 scale from the Czech maker Eduard. A package of resin and photo-etched accessories for upgrading a kit; it is not a standalone model.
In stock
23 €
Model CraftPKN4210/B

Náhradní čepele pro PKN4210 (2)

Spare blades for the modeling cutting tool carried under the code PKN4210. According to the name the package holds two pieces.
In stock
3.56 €
Firma4949A098/161:16

1:16 Methyl Bromide extinguisher - GB

The Methyl Bromide extinguisher — GB (1:16) is a resin miniature of a British fire extinguisher of the Second World War in 1:16 scale from the manufacturer Firma49.
In stock
6.36 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.