20% OFF SELECTED BRANDS! EDUARD, KINETIC, SPECIAL HOBBY, CMK & more

1:35 Razor wire Type.1

The photo-etched metal set 1:35 Razor wire Type.1 from E.T. Model serves for building razor wire for fencing and barriers in a diorama. It is not a kit of a vehicle, but a universal accessory.

Scale1:35
Manufacturer E.T. Model
Product EAN8591111728485

Responsibility details are not available.

5.56 €
4.60 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

E.T. Model 1:35 Razor wire Type.1 — photo-etched razor wire

A set of photo-etched metal sheet in 1:35 scale intended for making razor wire, that is a flat strip with punched blades of the kind used on the fencing and barriers of military and civilian sites. The manufacturer is the Chinese brand E.T. Model, which specializes in photo-etched accessories for models of military vehicles. The designation Type.1 distinguishes one of the blade shape variants that the manufacturer offers in this range. The set is a universal one and is not tied to a particular kit.

What the set is for

In scale, razor wire can practically not be replaced by any other material — neither plastic imitations nor ones twisted from wire have the necessary thinness and sharp silhouette. The photo-etched strip is wound into a coil and stretched out to the required length, so the result holds its shape and at the same time stays convincing in scale. It finds a use in dioramas with checkpoints, base perimeters, field fortifications or barriers by roads. It will serve just as well as an accessory for a display case with a single vehicle.

Tips for working and painting

Separate the parts from the fret with a sharp scalpel on a hard surface and clean the cuts up with a fine file. Then wind the strip tightly onto a cylindrical core — a brush handle or a drill shank of a diameter matching the intended coil will serve well — and stretch it carefully to the required length. The metal is glued with cyanoacrylate; on larger areas a two-part epoxy applied in spots helps. A base coat meant for metal is essential before painting, otherwise the finish does not hold; then comes a dark steel shade, light emphasis of the edges with a drybrush and finally rust tones with a wash or with pigments. While handling it, bear in mind that a stretched strip springs and that its edges are sharp.

Who the set is for

  • Builders of dioramas and vignettes in 1:35 scale
  • Modelers who want convincing fencing and barriers
  • More experienced builders used to working with photo-etched parts
  • An accessory for any vehicle or figures in this scale

This is an accessory photo-etched set, not a kit. The base model, glue and paints are not included in the package, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

It is an accessory photo-etched set. It holds no vehicle and no figures, only a fret with the parts for making razor wire.

The strip is separated from the fret, wound tightly onto a cylindrical core of a suitable diameter and then stretched carefully into a coil of the required length.

The metal is glued with cyanoacrylate. A base coat for metal is needed before painting, then a dark steel shade and weathering with a wash or with pigments.

Yes, it is a universal diorama accessory. It is not intended for one particular model and you will use it in a military as well as a civilian scene.

Last seen

E.T. ModelJ35-0061:35

1:35 Razor wire Type.1

The photo-etched metal set 1:35 Razor wire Type.1 from E.T. Model serves for building razor wire for fencing and barriers in a diorama. It is not a kit of a vehicle, but a universal accessory.
In stock
5.56 €
RT-DioramaRT355651:35

1:35 Pipe Set D=16mm (3pcs.)

Pipe of 16 mm diameter, 3 pieces, 1:35 scale - a diorama accessory from RT-Diorama for putting together a run of technical pipework in a scene.
In stock
13.16 €
1:32 F-100 -25 %Stock ClearanceFavorite
ReskitRSU32-00711:32

1:32 F-100

A resin add-on set for a model of the North American F-100 Super Sabre in 1:32 scale replaces selected plastic parts of a kit with castings carrying finer detail. It is not a kit of the aircraft but an accessory for one.
Last one!of 2
28.76 €21.56 € You save 7.20 €
PeewitPWM722901:72

1:72 Alouette III

A set of masks in 1:72 scale for a model of the Alouette III helicopter. It saves work on the glazing, of which this machine has an exceptional amount.
In stock
5.16 €
1:32 TBF/ TBM exteriér
-20 %
Favorite
EduardED321381:32

1:32 TBF/ TBM exteriér

Eduard 1:32 TBF/TBM exterior is a brass photo-etched set for refining the exterior details of the model of the TBF/TBM Avenger carrier torpedo bomber. An accessory for a plastic kit.
In stock
19.80 €15.84 € You save 3.96 €
1:48 MiG-19S LööK
-20 %
Favorite
EduardED6440681:48

1:48 MiG-19S LööK

Eduard MiG-19S LööK 1:48 is a set with a pre-painted instrument panel and colored steel seat belts that quickly lifts the interior of a MiG-19S model.
In stock
9 €7.20 € You save 1.80 €
MontexMXMM321171:32

1:32 Caudron C-714

Masks for a light French fighter of 1940: covering of the canopy from both sides and two markings.
In stock
7.96 €
ZvezdaZV61601:100

1:100 T-34/85

A snap-fit kit of the Soviet medium tank T-34/85 in 1:100 scale from Zvezda from the Art of Tactic range. A small simplified model with no gluing, for tabletop games and for collectors.
In stock
5.96 €
1:35 M-12 GMC-25 %Stock ClearanceFavorite
EduardED352981:35

1:35 M-12 GMC

An Eduard photo-etched detail set for the M-12 GMC in 1:35 scale . A metal accessory for refining the kit of the American self-propelled gun, not a stand-alone model.
Last one!of 2
10.40 €7.80 € You save 2.60 €
1:48 Hunter GA.11-25 %Stock ClearanceFavorite
EduardFE13901:48

1:48 Hunter GA.11

A set of photo-etched metal parts for detailing a model of the Hunter GA.11 aircraft in 1:48 scale.
10 left
10.40 €7.80 € You save 2.60 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.