1:35 REAR ARMOR FOR PZ. IV J CHASSIS AND DERIVATES WITH MID IDLER WHEELS BASE, TAMIYA KITS

1:35 REAR ARMOR FOR PZ. IV J CHASSIS AND DERIVATES WITH MID IDLER WHEELS BASE, TAMIYA KITS

7.96 €
Add to Cart

1:35 REAR ARMOR FOR PZ. IV J CHASSIS AND DERIVATES WITH MID IDLER WHEELS BASE, TAMIYA KITS

A resin rear hull armor plate for the Pz. IV version J chassis with a mid idler wheel mount, 1:35 scale from the manufacturer ELEFANT. A detailed replacement for the rear, not a kit in its own right.

Scale1:35
Manufacturer ELEFANT
Product EAN8591111000000

Responsibility details are not available.

7.96 €
6.58 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Rear hull armor for the Pz. IV J chassis and derived vehicles, 1:35 (ELEFANT)

A resin accessory from the manufacturer ELEFANT in 1:35 scale. It replaces the rear armor plate of the hull of the Pz. IV tank chassis in version J and of the vehicles derived from that chassis, in the rendering with a mid idler wheel mount. It is not a vehicle model but a part built into a kit in place of the original plastic rear.

What the part is for

Version J came about as a simplified production change and a number of details of its rear differ from the earlier batches. At the same time the idler wheel mount changed during production, so the same type of vehicle may have a different rear depending on its date of manufacture. A model built with the wrong combination may look right at first glance, but a knowledgeable eye will not miss it. A resin casting supplies the plate together with the matching mount at once, so there is no assembling and fitting of several plastic parts, where errors easily add up.

Tips for working and painting

The key is clean gluing and filling. After cutting the casting block off, level the mating surface on abrasive paper laid on a flat board and try the fit dry several times. Degrease the part in warm water with detergent before gluing. Apply the cyanoacrylate glue in drops at several points, not in a continuous bead, so that you have time to align the plate. Fill the resulting seam with putty, sand it back with fine paper once cured and rescribe the protected welds if the sanding reaches them. Begin the painting with primer across the whole joint, so that the difference in materials does not show under the paint.

Who the accessory is for

  • Builders of the Pz. IV tank in version J in 1:35 scale
  • Modelers of vehicles on the same chassis
  • Anyone after the correct combination of rear and idler wheel mount
  • More experienced builders working with resin, putty and cyanoacrylate glue

The accessory is supplied unpainted and it is not a kit in its own right. Paints, glue and the base model are not included in the package.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

According to the particular vehicle and period you are building. The manufacturer offers renderings with an early, a mid and a late mount as separate items.

The name states the version J chassis and the vehicles derived from it. The exact fit on individual kit toolings is not stated here, so try it dry.

Fill it with modeling putty, sand it lightly once cured and overspray the whole joint with primer, so that the transition between materials does not show.

It is not. This is one detail part for modifying a model you already own.

Last seen

ELEFANTELE350431:35

1:35 REAR ARMOR FOR PZ. IV J CHASSIS AND DERIVATES WITH MID IDLER WHEELS BASE, TAMIYA KITS

A resin rear hull armor plate for the Pz. IV version J chassis with a mid idler wheel mount, 1:35 scale from the manufacturer ELEFANT. A detailed replacement for the rear, not a kit in its own right.
In stock
7.96 €
MH modelsMHK729161:72

1:72 Messerschmitt Bf-110C/D Photoetched parts instrument panel for Airfix ex Modell-Hobby /AFX

Etched instrument panel Bf 110C/D 1:72 (MH models) — a photo-etched accessory with printed dial faces for a more faithful model cockpit.
In stock
2.36 €
My Hero Academia The Evil Villains Vol. 5 - Tomura Shigaraki-25 %Stock ClearanceFavorite
BandaiBANBP18934

My Hero Academia The Evil Villains Vol. 5 - Tomura Shigaraki

My Hero Academia The Evil Villains Vol. 5 - Tomura Shigaraki is a finished collector figure by Bandai from the My Hero Academia series. It is supplied fully painted and ready to display right away.
Last one!
33.56 €25.16 € You save 8.40 €
One Piece World Collectable Figure - The Great Pirates 100 Landscapes Vol. 9-25 %Stock ClearanceFavorite
BandaiBANBP18659

One Piece World Collectable Figure - The Great Pirates 100 Landscapes Vol. 9

One Piece World Collectable Figure - The Great Pirates 100 Landscapes Vol. 9 is a finished collector figure from the series One Piece. It comes painted and ready to display, with nothing to build or paint.
Last one!
11.56 €8.68 € You save 2.88 €
Kovozávody ProstějovKPEX0281:72

1:72 Stříkací šablony pro kabinu a kola pro modely LET 410 UVP, UVP-E, LET 420

Spray masks for the canopy and wheels of the LET 410 UVP, UVP-E and LET 420 from Kovozavody Prostejov are a masking set for painting a model of this aircraft cleanly in 1:72 scale.
In stock
6.36 €
ELEFANTELE350391:35

1:35 EARLY IDLER WHEELS BASE FOR PZ. IV CHASSIS, TAMIYA AND OLD DRAGON KITS

1:35 idler wheel base for the Pz.IV chassis – early type is a resin detail set for models of the German Panzer IV tank in 1:35 scale from the ELEFANT brand.
In stock
5.16 €
MengSPS-0561:35

1:35 Israel Main Battle Tank Merkava Mk.4M Fully Loaded Rear Baskets

Merkava Mk.4M Fully Loaded Rear Baskets 1:35 is a resin set of fully loaded rear baskets. It is a detail accessory from the Meng brand, not a stand-alone model.
In stock
61.96 €
ELEFANTELE350101:35

1:35 KUGELBLENDE FOR PANTHER G LATE - SMALL MOUNTH TYPE 1, 2 PCS.

A supplementary set of two machine gun ball mounts for the Panther Ausf. G of late production in 1:35 scale, in the small-opening rendering, type 1.
In stock
3 €
ELEFANTEL351721:35

1:35 VENTILATOR BASE FOR M48 AND MAGACH 1/2, VARIANT 1, 4 PCS

ELEFANT 1:35 Ventilator base for the M48 and Magach 1 and 2, variant 1 is a resin accessory with four pieces for models in 1:35 scale. It serves for detailing a kit; it is not a vehicle model.
In stock
6.76 €
EduardED6350621:35

1:35 T-34 - Waffle Tracks Set (for Tamiya Kits / 3D-Printed)

Printed tracks with the waffle pattern for the Soviet T-34 medium tank in 1:35 scale. They replace the vinyl band, which cannot be given a faithful sag or painted link by link.
In stock
20.80 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.