A supplementary set of two machine gun ball mounts for the Panther Ausf. G of late production in 1:35 scale, in the small-opening rendering, type 1.
Responsibility details are not available.
The ball mount in the front of the hull protected the gunner's machine gun and at the same time let him aim it. On the Panthers it replaced an earlier arrangement with a hinged flap and became a clearly apparent recognition feature of the front wall. On late production of the Ausf. G version, variants appeared that differ from one another in the size of the opening and in the shape of the rim; this set corresponds to the rendering with the smaller opening, designated as type 1.
Two pieces of the mount in 1:35 scale, that is a part for two models, or one for the build and one as a spare. Which part belongs to which variant of the hull is described in the manufacturer's instructions; the differences between the types are small, and it therefore pays to compare them with documentation for the particular machine before gluing.
The parts are not polystyrene; ordinary plastic cement will not join them. Use cyanoacrylate glue and sand the joint surface flat beforehand. Cut the excess material off with a sharp blade a little away from the part and carefully sand the remainder back, so as not to cut into the mount. Check for production marks against the light; on a rounded surface they are harder to see. Wash and degrease the part before painting, otherwise the finish adheres badly; then apply a base color and only over it the covering shade.
The set will be used by builders of German equipment who want the front of the hull exactly according to a particular production batch. It is an accessory for a kit, not a whole model. Paints and glue are not included, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!