1:35 STEEL WHEELS FOR IDF MAGACH 1 - 3, COMPLETE SET WITH 14 WHEELS

1:35 STEEL WHEELS FOR IDF MAGACH 1 - 3, COMPLETE SET WITH 14 WHEELS

28.76 €
Add to Cart

1:35 STEEL WHEELS FOR IDF MAGACH 1 - 3, COMPLETE SET WITH 14 WHEELS

Steel wheels for the Magach 1 to 3, a complete set of 14 wheels, 1:35 is a resin accessory from the manufacturer Elefant. It replaces the wheels of a whole running gear; it is not a vehicle kit.

Scale1:35
Manufacturer ELEFANT
Product EAN8591111000000

Responsibility details are not available.

28.76 €
23.77 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Steel wheels for the Magach 1 to 3, complete set, 1:35

A resin set of fourteen wheels in 1:35 scale from the manufacturer Elefant, intended for models of the Israeli Magach 1 to 3 vehicles. The number of pieces is stated directly in the name of the product, so this is a complete replacement of the running gear wheels, not a pair to top up with. The set does not contain a vehicle model; that has to be obtained separately.

What a complete set means

The difference between replacing two wheels and replacing a whole running gear is fundamental. When you replace only part of it, a visible difference in the crispness of the detail between the resin and the plastic wheels always remains. A complete set removes that problem: the whole underside of the vehicle has a uniform definition to the hub, the same transition to the rubber tire and the same depth to the lightening holes. On vehicles with a running gear derived from American equipment it is also clearly visible from the side along its whole length, so putting a full set in shows in the final photograph of a model more than many another accessory.

Building and painting tips

With fourteen castings it pays to work in series. Wash all the wheels at once in warm water with detergent, let them dry and only then separate them one by one from the casting blocks. Level the surfaces on one sheet of abrasive paper laid on glass, so that all the wheels have the same hub height, otherwise the track will wave. Check the alignment of every wheel on its pin dry; with resin, do not count on the part guiding itself. They are glued with cyanoacrylate glue. It is practical to paint them on a stick or on double-sided tape before gluing: spray the primer, the shade of the vehicle, then paint the tires and finally apply dust. An assembled running gear is considerably harder to paint.

Who the set is for

  • builders of Israeli tracked equipment in 1:35 scale
  • modelers who want uniform detail across a whole running gear
  • competition builders and model photographers
  • more experienced modelers used to resin

The accessory is supplied unassembled and unpainted. Glue, paints and the base kit are not included in the package.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

Fourteen pieces; the name of the product states it. This is a complete set for a running gear.

It does not. The set is aimed solely at the wheels; it includes neither tracks nor a vehicle kit.

Before gluing, mounted on a stick or on double-sided tape. On a finished running gear a brush reaches only part of the surface.

So that they have the same hub height. Differences will stop the track holding a straight line on the model.

Last seen

ELEFANTEL351201:35

1:35 STEEL WHEELS FOR IDF MAGACH 1 - 3, COMPLETE SET WITH 14 WHEELS

Steel wheels for the Magach 1 to 3, a complete set of 14 wheels, 1:35 is a resin accessory from the manufacturer Elefant. It replaces the wheels of a whole running gear; it is not a vehicle kit.
In stock
28.76 €
Art ScaleASKM350061:35

1:35 Sikorsky CH-54A Tarhe one-sided express fit mask for ICM

A single-sided pre-cut Art Scale masking set for the glazing of a model of the Sikorsky CH-54A Tarhe helicopter in 1:35 scale. It shortens the most drawn-out part of painting, the masking of the cockpit.
In stock
10.36 €
Print ScalePRSC480021:48

1:48 Civil war in Spain Part-1 Franco

Print Scale decals Civil War in Spain, Part 1: Franco in 1:48 scale. A set of waterslide decals with the markings of the Nationalist side.
In stock
7.96 €
Plastruct PLT90632

Rectangular Tubing (1 pcs) H-7,9mm W-6,4mm Wall-0,6mm L-375mm

Plastruct rectangular tube (Rectangular Tubing) 7.9 x 6.4 mm is a hollow styrene profile 375 mm long for modeling structures and conversions.
In stock
1.80 €
FujimiFU193621:24

1:24 Wheel Series No.103 BBS RG346 17-inch

Fujimi 1:24 BBS RG346 wheels, 17 inches in diameter is an accessory set of model wheels for re-shoeing car kits. It is not a model of a car nor a complete kit.
In stock
17.96 €
New WareNWAM13391:48

1:48 Dassault Rafale M - EXPERT Kabuki Masks (for Academy Kits)

New Ware kabuki masks for the Dassault Rafale M in 1:48 scale, the extended EXPERT version for the glazing and small areas as well. Intended for Academy kits.
In stock
7.96 €
Number FiveN5-C160

M3 B-Ing Blue

A blue acrylic modeling paint from the Number 5 line, the manufacturer's part number N5-C160. The shade is named after the car designated M3.
In stock
5.96 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.