A blue acrylic modeling paint from the Number 5 line, the manufacturer's part number N5-C160. The shade is named after the car designated M3.
Responsibility details are not available.
A blue shade from the Number 5 modeling line with the part number N5-C160. Its name is tied to the car designated M3 and to one particular color scheme. Compare the exact tone with the manufacturer's color chart before buying, as the name of the shade does not set it on its own. The paint will serve on a body and on smaller parts meant to have the same tone as the surface around them.
Sand the surface smooth, wash it and degrease it. On greasy plastic acrylic paint draws into drops and comes away with the masking tape when it is peeled off. Stir the bottle thoroughly before use, as the pigment settles to the bottom and unstirred paint covers unevenly.
Apply several thin coats with a short pause between them. One heavy coat floods the fine engraving of the panel lines and builds up runs on the edges, which are then harder to sand off than they were to apply. Thin it with the thinner intended for this line of paints, as a thinner from another line can curdle the paint into grains. The manufacturer gives the thinning ratio and the pressure in the airbrush in the instructions on the packaging. Use an airbrush on large surfaces, and a brush suits small parts. Stick masking tape only onto a fully dried coat.
For builders of car models who want a ready blue instead of mixing a shade of their own. It is the paint on its own, and thinner, clear varnish and spraying equipment are not supplied with it, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!