A single-sided pre-cut Art Scale masking set for the glazing of a model of the Sikorsky CH-54A Tarhe helicopter in 1:35 scale. It shortens the most drawn-out part of painting, the masking of the cockpit.
Responsibility details are not available.
Pre-cut self-adhesive masks for the glazing of a model of the heavy helicopter Sikorsky CH-54A Tarhe in 1:35 scale from the brand Art Scale. It is neither a kit nor a photo-etched set but an aid that saves the most drawn-out and least rewarding part of painting. The masks are cut to the shape of the frames, so there is no cutting tape to a ruler with a scalpel.
A single-sided set deals with the outside of the glazing. The double-sided version, which the same manufacturer offers as a separate item, adds masks for the inside as well; those are useful when you want the frames painted from inside the cockpit too, as is usual on machines with a clearly visible interior. If you are not building the interior in detail, or you are closing the cockpit up, the single-sided version is entirely sufficient.
Wash and degrease the glazing before masking so the mask holds. Peel the parts off with pointed tweezers or a wooden stick, lay them on to the shape of the frame and press them down with a soft tool so the edge seals and the paint does not run under it. Spray the paint in several thin layers; one heavy layer builds a ridge at the edge of the mask that shows once it is removed. Take the masks off while the paint is freshly dry, not after several days, and pull them at a shallow angle rather than straight up. On a helicopter with such a large glazed area this method is markedly safer than laborious cutting of tape.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!