1:400 Set of 20 pcs (12,7mm) Vickers Mk.III machine gun barrels for Royal Navy ships

1:400 Set of 20 pcs (12,7mm) Vickers Mk.III machine gun barrels for Royal Navy ships

6.76 €
Add to Cart

1:400 Set of 20 pcs (12,7mm) Vickers Mk.III machine gun barrels for Royal Navy ships

A set of 20 turned metal barrels for the 12.7 mm Vickers Mk.III machine gun in 1:400 scale from the Polish maker Aber. For models of Royal Navy ships.

Scale1:400
Manufacturer Aber
Product EAN8591111490672

Responsibility details are not available.

6.76 €
5.59 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Vickers Mk.III 12.7 mm machine gun barrels, 20 pieces, 1:400 — Aber

The set holds twenty turned metal barrels for the 12.7 mm Vickers Mk.III heavy machine gun in 1:400 scale. It serves to replace the plastic barrels on models of Royal Navy ships and is not a standalone model. On a weapon this small the plastic barrel in 1:400 scale tends to be no more than a short bump, so a metal replacement on deck changes the whole impression of the close-in anti-aircraft defense.

The real subject

The 12.7 mm Vickers machine gun in the Mk.III version was a typical close-in anti-aircraft weapon on British ships of the 1930s. It was fitted above all into quadruple mountings with a characteristic shield and vertical magazines. Battleships, cruisers and destroyers all carried them. During the war it turned out that against faster and tougher aircraft a caliber of 12.7 mm was no longer enough, and the weapon was gradually replaced by 20 mm Oerlikon guns, so it is more typical of early wartime configurations.

Building and painting tips

Cut off the plastic barrels as close to the carriage as possible and carefully drill the hole left behind to the diameter of the pin on the metal part. Degrease the metal with alcohol before gluing and roughen the mating surface slightly, then glue it with cyanoacrylate glue in small drops. In 1:400 scale the parts are very small, so tweezers, a light-colored mat and working over a box all pay off, so that a barrel does not get lost. Paint only once a base coat intended for metal is down, otherwise the paint will not hold on the smooth surface.

Who the set is for

  • For models of Royal Navy ships
  • A replacement for unconvincing plastic barrels on quadruple mountings
  • A detail accessory, not a complete model of a ship

This is a detail accessory for your own model, not a complete kit of a ship. Glue, paints and the base model are not included in the package.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

Twenty turned metal barrels for the 12.7 mm Vickers Mk.III machine gun.

Above all British ships in their configuration from the end of the 1930s and the early war years, when Vickers machine guns were still common.

No, it deals only with the barrels. The mounting and the shield stay from the original kit.

In 1:400 scale these are very small parts, so we recommend tweezers, a magnifier and a steady hand.

Last seen

AberABR400L101:400

1:400 Set of 20 pcs (12,7mm) Vickers Mk.III machine gun barrels for Royal Navy ships

A set of 20 turned metal barrels for the 12.7 mm Vickers Mk.III machine gun in 1:400 scale from the Polish maker Aber. For models of Royal Navy ships.
In stock
6.76 €
EduardED6489421:48

1:48 Focke-Wulf Fw-190A-7 undercarriage legs BRONZE

1:48 Focke-Wulf Fw 190A-7 undercarriage legs BRONZE are cast bronze landing gear legs from Eduard that replace the plastic parts and safely carry a finished model.
In stock
19.80 €
1:48 P-51D/K Mustang N/A 8th Air Force-25 %Stock ClearanceFavorite
MengLS-0101:48

1:48 P-51D/K Mustang N/A 8th Air Force

1:48 North American P-51D/K Mustang 8th Air Force - a plastic kit of the famous American escort fighter from the maker Meng in an edition devoted to the machines of the Eighth Air Force.
11 left
37.96 €28.48 € You save 9.48 €
EduardED6489941:48

1:48 P-51B/C undercarriage legs BRONZE

Eduard P-51B/C landing gear legs in bronze (1:48) are precisely cast load-bearing legs of the main landing gear for models of the P-51B and P-51C Mustang.
In stock
19.80 €
HGWHGW1355131:35

1:35 FW190A-6 - SEATBELTS

A seat harness for the Fw 190A-6 in 1:35 scale from HGW will replace the molded harness in the seat and make the look of the cockpit more natural.
In stock
10.36 €
1:48 Grumman FM-1 undercarriage legs BRONZE-25 %Stock ClearanceFavorite
EduardED6489431:48

1:48 Grumman FM-1 undercarriage legs BRONZE

1:48 Grumman FM-1 undercarriage legs BRONZE are cast bronze landing gear legs from Eduard for a model of the Wildcat. Metal will carry a finished model where a thin plastic part would sag.
16 leftof 17
27.80 €20.84 € You save 6.96 €
HGWHGW1326411:32

1:32 A-20G HAVOC - SEATBELTS

A seat harness for the A-20G Havoc in 1:32 scale from HGW will replace the molded harness in the seat and lend the cockpit a believable look.
In stock
11.40 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.