LAST CHANCE! 20% OFF Ends Tonight!
1:48 B-17F/G Flying Fortress wheels w/ weighted tyres type

1:48 B-17F/G Flying Fortress wheels w/ weighted tyres type "c" (RA)

9.56 €
Add to Cart

1:48 B-17F/G Flying Fortress wheels w/ weighted tyres type "c" (RA)

1:48 B-17F/G Flying Fortress wheels with weighted tires type c (RA) are the third tread variant of resin wheels for the late Flying Fortresses. An accessory to a model, not a kit of the aircraft.

Scale1:48
Manufacturer Armory
Product EAN8591111000000

Responsibility details are not available.

9.56 €
7.90 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Type c (RA) wheels for the B-17F and B-17G in 1:48 scale (Armory)

Armory offers several tread variants of main wheels for the late Flying Fortresses; this set carries type c (RA). It holds resin wheels with weighted tires for the B-17F and B-17G versions in 1:48 scale. The set is not a model of the aircraft but a replacement detail, which takes the place of the plastic wheels from a kit.

Painting the tire, where mistakes happen most often

In period photographs rubber appears as a very dark gray, not as black. A pure black finish takes all the pattern away and the wheel then reads at 1:48 scale as a blind mass. The proven method: a base in a dark gray shade, then a light brightening of the upper part of the sidewall with a thinned lighter gray, flatten the whole thing, and finally suggest dust with a dry pigment around the contact patch and in a narrow band on the side. The hub is painted separately, most often in the shade of the underside of the aircraft; you separate it with a ring cut from masking tape. The rest of the impression is made by a fine dark wash in the groove between the tire and the hub.

Fitting tips

First wash the castings in warm soapy water, as otherwise the paint will not hold on any mold release residue. Cut the casting block off with a saw or a knife and level the remainder wet on abrasive paper laid on a flat board, so that the flattened area stays planar. Do not breathe resin dust in. They are glued with cyanoacrylate glue. Before fixing them, fit the wheels dry, stand the model on a flat surface and turn the flattened areas to point exactly downward; otherwise the model will stand crooked.

Who the set is for

  • builders of the B-17F and B-17G in 1:48 scale
  • modelers who want the tread to match a period photograph of their own machine
  • those who take an interest in painting and weathering landing gear
  • more experienced modelers working with resin

This is an accessory set, not a model of the aircraft. The kit, glue and paints are not included in the package. Check the match with the landing gear of your own model beforehand.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

In the tread of the tire and the shape of its sidewall. The application to the F and G versions and the 1:48 scale stay the same.

A very dark gray, not black. In scale, black takes the tread pattern away and the wheel then looks like a blind area.

Yes. Cement for plastic does not etch resin, so the joint will not hold. A cyanoacrylate glue is the right choice.

Last seen

ArmoryARAW483461:48

1:48 B-17F/G Flying Fortress wheels w/ weighted tyres type "c" (RA)

1:48 B-17F/G Flying Fortress wheels with weighted tires type c (RA) are the third tread variant of resin wheels for the late Flying Fortresses. An accessory to a model, not a kit of the aircraft.
In stock
9.56 €
Voyager ModelPEA2551:35

1:35 Modern US Stryker M1134 blast shield (For AFV CLUB 35134)

A photo-etched blast shield set for the modern American Stryker M1134 armored vehicle in 1:35 scale is an accessory for a kit you already own, not a model of the vehicle. It is made by Voyager Model.
In stock
12.76 €
KelikKS720511:72

1:72 HMS Furious (CV-3) 1942 Type 1 - Base - Acrylic 3mm (280x180mm)

A color display base for a model in 1:72 scale with the motif of the British aircraft carrier HMS Furious, the Type 1 version. Acrylic 3 mm thick, 280x180 mm.
In stock
17.96 €
HaulerHLX482861:48

1:48 Sd.Kfz.251 Stuka Zu Fuss conv. AFV and TAMIYA

1:48 Sd.Kfz. 251 Stuka zu Fuss conversion set is a resin accessory for a kit you have already bought, not a model in its own right. It adds the Wurfrahmen 40 side frames for launching rockets to the half-track carrier.
In stock
30.80 €
1:48 North-American P-51B/P-51C Mustang Malcolm Hood canopy -25 %Stock ClearanceFavorite
EduardEX10521:48

1:48 North-American P-51B/P-51C Mustang Malcolm Hood canopy

1:48 North-American P-51B/P-51C Mustang Malcolm Hood canopy is a set of Eduard masks for Mustangs with the bulged British Malcolm Hood canopy.
4 leftof 8
6.80 €5.12 € You save 1.68 €
AberABR72L081:72

1:72 Soviet tank barrel 85cm ZIS-S-53 L/54,6 T-34/85

A turned metal barrel of the 85mm ZIS-S-53 gun for a model of the T-34/85 tank in 1:72 scale. It replaces the plastic barrel from a kit.
In stock
3.16 €
AberABR700L351:700

1:700 Set of barrels for Italian Battleship

A set of turned barrels for an Italian battleship in 1:700 from the maker Aber. A metal replacement for the plastic barrels of the main, secondary and dual-purpose armament.
In stock
17.96 €
1:48 Fairey Fulmar Mk.I seatbelts STEEL-25 %Stock ClearanceFavorite
EduardFE14101:48

1:48 Fairey Fulmar Mk.I seatbelts STEEL

A set of Eduard etched steel seat belts for the Fairey Fulmar Mk.I in 1:48 scale replaces belts that are missing or only suggested in both seats.
9 leftof 10
6.80 €5.12 € You save 1.68 €
1:32 F-16A/B Netz chaff/flare dispensers and antennas
-20 %
Favorite
Aires/QuickboostQB320601:32

1:32 F-16A/B Netz chaff/flare dispensers and antennas

Quickboost chaff and flare dispensers and antennas for the F-16A and F-16B Netz in 1:32 scale. Resin accessories from Aires for the Israeli version of the F-16.
In stock
6.36 €5.09 € You save 1.27 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.