A vacuum-formed clear canopy for a model of the F-CK-1 aircraft in 1:48 scale. The thin wall makes it possible to build the model with an open cockpit.
Responsibility details are not available.
The F-CK-1 is a Taiwanese light fighter aircraft developed in the 1980s for the home air force. The cockpit with its good field of view is a striking feature of it, so on a model it is exactly the canopy that the viewer looks at first.
A clear canopy for a model in 1:48 scale, vacuum-formed. According to the name, it is exactly this technology. Vacuum forming gives a markedly thinner wall than can be achieved on an ordinary kit part, and a thin wall shows above all where the canopy is slid back and where you are looking at its edge. That is exactly why replacement canopies are bought: a model with an open cockpit looks convincing with a thin canopy, and not with a thick one.
First cut the canopy out roughly or trim it with a sharp blade with enough margin. Then sand the edge down to the outline mark on fine abrasive paper laid on a flat board, with short strokes and with frequent trying on the model; take away little by little, because you will not add the material back. Small scratches can be polished out with an abrasive sponge and polishing paste. Glue with glue intended for clear parts, which dries clear and does not fog the surface; cyanoacrylate glue can cloud clear material with its fumes. Mask the frames first and only then spray the paint, so that the view through stays clean.
A replacement canopy will be appreciated by modelers who want to have the cockpit open, or by those whose original part was damaged. Working with it calls for care when sanding the edge.
The kit of the aircraft, paints, masks and glue are not included in the delivery, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!