20% OFF SELECTED BRANDS! EDUARD, KINETIC, SPECIAL HOBBY, CMK & more

1:48 Huricane wheel set

A resin set of wheels for the Hawker Hurricane model in 1:48 scale is an accessory to a plastic kit you have already bought, not a model of its own. It replaces the wheels from the box with more detailed castings.

Scale1:48
Manufacturer Brengun
Product EAN8591111777742

Responsibility details are not available.

6.76 €
5.59 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

A set of wheels for the Hurricane in 1:48 scale

These resin wheels from Brengun are an accessory for a modeler building the British Hawker Hurricane fighter in 1:48 scale. The set replaces the main landing gear wheels supplied in the kit. It is not an airplane model or a kit; the base model has to be obtained separately.

Why wheels are swapped most often

On an aircraft model the wheels are the part that is seen from close up and from below, and at the same time the hardest to make in plastic. The tread pattern, the lettering on the sidewalls and the structure of the hub are always a compromise in a split metal mold, and a wheel from a kit also tends to be glued up from two halves with the seam running exactly across the tread. A resin casting is usually in one piece, so filling the seam is avoided, and it carries finer texture. With wheels there is also often the question of load: the tire of a real aircraft is slightly flattened where it touches the ground, which immediately settles a model onto the ground instead of leaving it balancing on a point.

Tips for working and painting

Wash the castings in lukewarm soapy water to remove the mold release agent and let them dry. On a wheel the casting block tends to run along the flat of the tread, which touches the surface anyway. Cut it off with a saw and sand the remainder flat wet, ideally by running the wheel over abrasive paper laid on glass. Work with respiratory protection. It pays to paint the hub separately and to mask the tire with a circular mask or to go round it with a brush. Apply a primer to the resin first. A tire is not black but more of a dark gray with a hint of brown; pure black looks flat on a model. Fit them to the landing gear legs at the very end, after the model has been varnished.

Who the set is for

  • Modelers building the Hurricane in 1:48 scale.
  • Those who want to get rid of the parting seam across the tread of the tire.
  • Builders who seat a model on the surface of a diorama.
  • Beginners at working with resin, because wheels are among the simplest resin accessories.

The accessory is supplied unassembled and unpainted. The base kit, glue and paints are not included in the package, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

It is not. These are replacement wheels for a Hurricane model in 1:48 scale; you need to have the kit itself.

The exact contents of the package are not stated here. Sets of wheels of this kind commonly cover the main landing gear wheels; the packaging of the set gives the particulars.

Do not use pure black. A dark gray shade with a light hint of brown works better, with a subtle lightening of the tread by dry-brushing.

Last seen

BrengunBRL480391:48

1:48 Huricane wheel set

A resin set of wheels for the Hawker Hurricane model in 1:48 scale is an accessory to a plastic kit you have already bought, not a model of its own. It replaces the wheels from the box with more detailed castings.
In stock
6.76 €
RT-DioramaRT355901:35

1:35 Industrial stairs

1:35 Industrial stairs is a set of industrial stairs to assemble in 1:35 scale for factory and industrial dioramas.
In stock
17.16 €
LukgraphLGHdec0071:32

1:32 Decals light grey linen

Decals light gray linen is a decal sheet with the light gray texture of covering fabric for models in 1:32.
In stock
11.96 €
Mettalic DetailsMDR48371:48

1:48 MiG-29. Jet nozzles (opened)

1:48 MiG-29 engine nozzles in the open position are a detail accessory for a kit, not a model of the aircraft — they replace the plastic ends of the engine nacelles with finer parts.
In stock
22.36 €
1:35 M 109 A2 interier accessories set
-20 %
Favorite
Black Dog modelBDT351011:35

1:35 M 109 A2 interier accessories set

A set of accessories for the interior of a model of the American M109A2 self-propelled howitzer in 1:35. The model is not included in the delivery.
In stock
55.16 €44.13 € You save 11.03 €
1:48 F-16 ejection seat PRINT
-20 %
Favorite
EduardED6488371:48

1:48 F-16 ejection seat PRINT

F-16 ejection seat PRINT 1:48 is a 3D printed resin ACES II seat for F-16 models. A detail accessory, not a kit.
In stock
9 €7.20 € You save 1.80 €
1:32 Bf109 E-3/4/7 - crosses
-20 %
Favorite
HGWHGW2320391:32

1:32 Bf109 E-3/4/7 - crosses

HGW wet transfers - crosses for the Bf 109 E-3/4/7 in 1:32 scale bring the national insignia crosses of the German fighter with no carrier film. Markings that look sprayed on once applied.
In stock
11.16 €8.93 € You save 2.23 €
LifecolorLIFUA7010

UA7010 - Rebel Brown

Lifecolor Rebel Brown is a water-thinnable matte acrylic paint in a 22 ml bottle. The brown shade suits the base areas, uniforms, equipment and earthy accessories of models and figures.
In stock
2.76 €
MontexMXK323611:32

1:32 HURRICANE I TROP FLY

Montex 1:32 Hurricane Mk.I tropical is a set of self-adhesive painting masks for modelers, not a kit. The masks are cut to fit the glazing of the Fly kit.
In stock
11.96 €
ZebranomodelZE1000951:100

1:100 Panhard 178 PC

The Panhard 178 PC in 1:100 scale is a kit of the command version of the French armored car from the maker Zebranomodel.
In stock
9.16 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.