1:48 Lockheed F-104J Starfighter TFace

Pre-cut kabuki masks for the glazing of the Japanese Starfighter in 1:48 scale, in the TFace version, that is from the outside as well as the inside.

Scale1:48
Manufacturer Vyprodáno
Product EAN8591111000000

Responsibility details are not available.

9 €
7.44 € without VAT
Out of stock – can be reserved
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

The Japanese Starfighter and its glazing

The Lockheed F-104J came about as an interceptor version of the Starfighter tailored to the Japanese Air Self-Defense Force. Most of the two hundred machines were built under license by Mitsubishi, and at home the aircraft was given the nickname Eiko. It stayed in service from the beginning of the 1960s to the middle of the 1980s and its task was to get to altitude as fast as possible and intercept an intruder over the Japanese islands. It is exactly the slender canopy and the angular windshield that make its glazing one of the more laborious parts of the build.

Why TFace in particular

The TFace designation means a double set of pieces. One half covers the glass from the outside, the other follows the same shapes on the inner side. The model can thus be sprayed on the inside in the cockpit color as well, without the frames being blurred or the typical show-through arising on a thin canopy. The masks are cut from kabuki paper, which does not lift on a bend and leaves no adhesive behind when removed.

  • Precisely shaped pieces for the canopy, the windshield and the side windows
  • The inner and the outer set in one package
  • Intended for the kit from Kinetic
  • The laborious cutting of strips from adhesive tape falls away

Working with them is undemanding: a piece is lifted with tweezers, laid on dry and pressed down with a soft wooden stick. The paint is applied in thin coats, so that it does not get under the edge. Take the masks off while the paint has only just set, not once it has fully cured.

What to watch out for

Fit the inner pieces before you glue the canopy to the fuselage, otherwise there is no getting at them. If you are building with the cockpit open, leave a thin strip of mask on the frame until the very end of the work; it will protect the edge from rubbing while the finished model is handled.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

It also contains counterparts for the inner side of the glass, so the cockpit frame can be sprayed from the inside as well.

For the F-104J model from Kinetic in 1:48 scale.

Best of all shortly after the paint has set. Once it has fully cured there is a risk that the edge of the paint will tear away with the mask.

In ordinary use, no; the adhesive is weak and meant to be removed once.

Last seen

PlusmodelPMOAL70531:72

1:72 P-3 Orion kola

P-3 Orion wheels 1:72 is a resin detail set from Plusmodel with nose as well as main wheels and a mask for painting, for a model of the Lockheed P-3 Orion maritime patrol aircraft.
In stock
7.48 €
FriulmodelATL-1301:35

1:35 AMX 13 rubber track

Metal tracks for the AMX-13 1:35 are a set of link tracks in white metal from Friulmodel. They faithfully reproduce the rubber pattern of this tank's tracks; it is not a kit.
In stock
24.76 €
EvergreenEVG149

Profil 1,0 x 6,3 mm

Profile 1.0 x 6.3 mm from Evergreen is a white polystyrene strip 35 centimeters long, suitable for wide trims, bands and load-bearing strips.
In stock
0.32 €
AirfixAX01316V1:76

1:76 Russian T-34 Vintage Classics

Russian T-34 1:76 (Vintage Classics) is a plastic kit of the Soviet T-34 medium tank from Airfix, a reissue of a classic mold in the small 1:76 scale.
In stock
7.96 €
ŘOP o.s.F72/1451:72

1:72 Palebný objekt KŽ-2 1955

1:72 Firing work KZ-2 1955 is a resin kit of a Czechoslovak postwar fortification work from ROP o.s., intended for more experienced modelers and collectors of fortifications.
In stock
14.36 €
ReskitRS72-04801:72

1:72 AIM-9J Sidewinder missiles (4 pcs)

AIM-9J Sidewinder 1:72 is a 3D-printed resin set of precisely made missiles (4 pcs) to replace the plastic parts from a boxed kit.
In stock
8.36 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.