1:48 Mask General Dynamics F-111 BASIC (ACA/ITA)

A set of masks for the General Dynamics F-111 in 1:48 scale, the Basic variant

A basic set of precisely cut masking films from New Ware for kits of the General Dynamics F-111 in 1:48 scale. The Basic variant concentrates on the most laborious parts of a build, masking the cabin glazing and the landing gear wheels, and so offers the quickest route to a clean spray.

The real subject

The General Dynamics F-111 was an American two-seat tactical aircraft and the first series-produced machine with a variable-geometry wing. The crew sat side by side under a large shared canopy, that is, exactly where cut masks save the most work. The type stood out for penetrating to a target at low altitude in all weathers and served from the 1960s, in Australia even until 2010.

Use

• Lift the film off with tweezers and lay it on a clean, degreased surface of the model.
• Smooth the edges down thoroughly, so that paint does not creep under the mask.
• Spray light coats and carefully remove the mask once dry.
• The masks for the wheels ensure a clean division between the hub and the tire.

Who it is for

For anyone who builds the F-111 in 1:48 scale and wants to save themselves the tedious outlining of the frames of a large cabin by hand. The basic variant is an ideal choice even for less experienced modelers who are starting out with masks.

This is a masking accessory, not a standalone model kit. The set is intended for particular kits of the given type; check compatibility with your kit before ordering.