1:48 Sukhoi Su-27UB TFace

Glazing masks for the Su-27UB, 1:48 scale

A set of self-adhesive masks for the glazing of the Su-27UB aircraft in 1:48 scale. The Su-27UB is the two-seat release of the heavy Su-27 fighter with a lengthened cockpit for two seats in tandem, so the glazing is extensive and carries a lot of frames. The designation TFace means that the set contains elements for the outer as well as the inner side of the glazing; a release without this designation is issued under a different code.

How to use the masks

The elements are cut to the shape of the frames, so cutting strips out of tape is done away with. First wash and degrease the clear part; grease holds a mask only for a moment. Lift the mask off the backing with pointed tweezers, lay it down and press the edges with a toothpick, so that paint does not run under them. They are stuck on before spraying, not onto a dried coat. Spray several light layers; a dense layer will create a ridge at the edge of the mask that stays visible once it is removed. Take the mask off as soon as the paint has set; on a fully cured coat the edge tears. Leave the inner elements in place until the end of the build; they protect the glazing from fogging and dust.

• self-adhesive masks for the glazing of the Su-27UB, 1:48 scale
• the TFace release: elements for the outer as well as the inner side
• shaped cuts following the cockpit frames
• stuck onto a degreased clear part before spraying
• taken off as soon as the paint has set

Who the set is for

It suits anyone who is building the Su-27UB and wants the cockpit frames straight and sharply bounded. The masks are cut for a particular kit, which the manufacturer gives in the instructions; before buying, therefore, check that they match yours.

Terms of supply

The masks alone are supplied. The model, paints and glue are not included in the delivery, unless stated otherwise.