1:72 SS-100 Hanomag Painting mask (TAKOM)

1:72 SS-100 Hanomag is a pre-cut self-adhesive masking set from SX-Art for the model of the Hanomag SS-100 heavy road tractor. It is not a kit but an aid for painting. Target kit: Takom.

Scale1:72
Manufacturer SX-Art
Product EAN8591111000000

Responsibility details are not available.

4.76 €
3.93 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

SX-Art 1:72 SS-100 Hanomag masking set

A self-adhesive masking set from SX-Art for the model of the Hanomag SS-100 heavy road tractor in 1:72 scale. It is neither a kit nor parts for a model but a sheet of pre-cut masks for painting finished parts. In a small scale a pre-cut mask is the surest route to a sharp edge, because cutting strips of tape by hand is at the limit of what can be done here. Dimensionally it is based on the Takom kit.

What is masked on the tractor

The glazing consists of a split windshield and the side windows of the cab, that is, a fairly simple set of straight frames. The other items on this vehicle are more interesting. The wheels above all: the tractor stands on large wheels with massive tires, and the precise border between the dark rubber and the lighter disc is one of the few things on a 1:72 vehicle model that catch the eye immediately. Then there are the glasses of the large free-standing headlights, which are meant to stay clear. The contents of the sheet are not stated here, so check before you buy which of these items the set covers.

How to use the set

Degrease the parts and let them dry. Lift the mask off with tweezers, lay it down dry and press the edge with a soft tool. On the wheels it is essential to center the mask exactly on the disc, or the rubber transition will be lopsided. Spray the paint in thin coats at a right angle to the edge. A vehicle model is nearly always weathered, so take the mask off right after spraying and apply washes, filters and pigments only onto a finished and dry coat.

Who the set is for

  • Builders of models of historic trucks and tractors in 1:72 scale
  • Modelers who want a precise transition between tire and disc
  • Anyone after clean cab framing with no touching up
  • Anyone who sprays with an airbrush and wants to save preparation time

This is an accessory for painting, not a model. The kit, paints and glue are not included in the package, unless stated otherwise. Check that it matches your kit before you buy.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

A German-built heavy road tractor of the 1930s and 1940s, used for hauling heavy trailers and semi-trailers.

It is not. It is a masking sheet for painting a finished model; the kit has to be bought separately.

The contents of the package are not stated here. The extent of the sheet is not stated here.

It is worth it most of all there. In 1:72 scale strips of tape are very hard to cut, and a pre-cut shape holds the edge more precisely than can be managed by hand.

For the Takom kit in 1:72 scale. The plastic parts of the base model are not included in the package.

Last seen

SX-ArtSXA720591:72

1:72 SS-100 Hanomag Painting mask (TAKOM)

1:72 SS-100 Hanomag is a pre-cut self-adhesive masking set from SX-Art for the model of the Hanomag SS-100 heavy road tractor. It is not a kit but an aid for painting. Target kit: Takom.
In stock
4.76 €
1:32 North-American F-100C Super Sabre slats-25 %Stock ClearanceFavorite
EduardED324691:32

1:32 North-American F-100C Super Sabre slats

Eduard 1:32 North American F-100C Super Sabre slats is a photo-etched set focused on the slats on the leading edge of the wing of a model of the American supersonic aircraft in 1:32 scale.
Last one!
21.92 €16.44 € You save 5.48 €
ArmycastACM00012

Stripes - pruhy (width 6,0 to 7,0mm step 0,1mm length 200mm)

Armycast Stripes (width 6.0 to 7.0 mm, step 0.1 mm, length 200 mm) is a universal masking aid: a sheet of self-adhesive vinyl stripes graded by tenths of a millimeter, intended for spraying perfectly straight lines and color bands on a model. It is neither a kit nor a decal set.
In stock
3.96 €
Dead DesignUC320291:35

1:35 A6M2b Reisen undercarriage wheel bay paint mask Border model

A set of masks in 1:35 scale for the landing gear bays of the Japanese A6M2b fighter aircraft, cut for the Border Model kit.
In stock
6.36 €
AberABR56L011:56

1:56 U.S. 75mm M3 tank barrel for Sherman M4

A turned 75 mm M3 gun barrel for the Sherman M4 in 1:56 scale. The metal part replaces the plastic barrel and gives the tank a sharp muzzle and a perfectly straight axis.
In stock
2.76 €
Quinta StudioQD720711:72

1:72 MiG-29 9-12 3D-Printed & coloured Interior on decal paper (GWH)

Quinta Studio 1:72 MiG-29 9-12 3D-Printed and coloured Interior on decal paper is a set of color-printed three-dimensional interior decals in 1:72 scale. It is cut for the Great Wall Hobby kit.
In stock
9.56 €
EduardFE15301:48

1:48 B-26G Marauder seatbelts STEEL

Steel photo-etched restraint belts by Eduard for the 1:48 B-26G Marauder are belts of steel foil printed in color that hold the sag they are formed into.
In stock
10.40 €
1:48 F-86F-25/30 seatbelts STEEL-25 %Stock ClearanceFavorite
EduardFE15001:48

1:48 F-86F-25/30 seatbelts STEEL

1:48 F-86F-25/30 seatbelts STEEL are photo-etched harnesses in steel for the cockpit of the jet Sabre in 1:48 scale.
2 leftof 4
8 €6 € You save 2 €
EduardFE14081:48

1:48 Republic P-47D-25RE Thunderbolt seatbelts STEEL

Eduard 1:48 P-47D-25RE Thunderbolt seatbelts STEEL are pre-painted photo-etched steel seat belts that replace the flat plastic parts in the cockpit with a true metal substitute.
In stock
6 €
PolákPOL9811

Lesní porost - varianta A 27,5x20,5 cm

Forest growth – variant A (27.5x20.5 cm) is a ready-made foliage carpet from the Czech manufacturer Polak for imitating forest undergrowth on dioramas and layouts.
In stock
18.76 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.