LAST CHANCE! 20% OFF Ends Tonight!
1:72 Unimog U406 DoKa Military Airport Tug + AERO Rx Towbar

1:72 Unimog U406 DoKa Military Airport Tug + AERO Rx Towbar

27.96 €
Add to Cart

1:72 Unimog U406 DoKa Military Airport Tug + AERO Rx Towbar

A resin kit of the Unimog U406 airport tug with a double cab and a towbar, 1:72 scale from the Planet models brand. It is intended for experienced modelers.

Scale1:72
Manufacturer Planet models
Product EAN8591111000000

Responsibility details are not available.

27.96 €
23.11 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Unimog U406 DoKa, military airport tug, 1:72 - a Planet models resin kit

A resin kit of a military airport tug on the Unimog U406 chassis with a double cab, complemented by a towbar for aircraft. The 1:72 scale matches the most widespread aircraft modeling scale, so the vehicle can be placed beside models of aircraft in an airfield scene. The abbreviation DoKa in the name means double cab, that is the form with two rows of seats and a shortened cargo bed. Resin castings offer finer detail than injection-molded plastic but call for a more experienced builder. The number of parts and the exact contents of the package are given on the packaging of the kit.

The real subject

The Unimog U406 is a light all-wheel-drive off-road truck with portal axles and high ground clearance. It was built from the mid-1960s and its civilian and military versions were used for a very long time. The combination of low weight, good traction and a short wheelbase made it a suitable machine for work at airfields, where it serves to move aircraft about the apron. The towbar is connected between the tug and the nose landing gear of an aircraft and allows the vehicle to be steered even while reversing with an aircraft. The double cab form carries the apron crew as well as the driver.

Building and painting tips

First wash the parts in warm water with detergent so that the mold release agent is removed. Cut the casting blocks off with a saw; do not snap them. Sand resin wet and with airway protection. It is bonded with cyanoacrylate glue; ordinary cement for plastic does not hold on resin. The towbar is a thin part that breaks easily, so glue it on at the end and consider reinforcing it with wire. Apply an undercoat before painting, and after the main color bring out the recesses with a wash and add dust effects on the wheels and the underside of the vehicle.

Who the model is for

  • Experienced modelers with experience of resin castings
  • Builders of airfield scenes and dioramas in 1:72
  • Anyone interested in airfield ground equipment and handling vehicles
  • Collectors of Unimog vehicles in modeling scales

The model is supplied unassembled and unpainted as a resin kit. Glue, paints and accessories are not included in the package, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

It is the abbreviation for a double cab, that is the form with two rows of seats and a shorter cargo bed.

Of casting resin. It is not injection-molded plastic, so cyanoacrylate glue and a different preparation of the parts are needed.

The towbar is part of the set. It connects between the tug and the nose landing gear of an aircraft, so it suits aircraft of a corresponding size in 1:72.

Resin kits are more demanding both in preparing the parts and in gluing. We recommend them only after several plastic models have been built.

Last seen

Planet modelsMV1101:72

1:72 Unimog U406 DoKa Military Airport Tug + AERO Rx Towbar

A resin kit of the Unimog U406 airport tug with a double cab and a towbar, 1:72 scale from the Planet models brand. It is intended for experienced modelers.
In stock
27.96 €
Dead DesignVM720861:72

1:72 Yokosuka D4Y Suisei National Insignia paint masks w/o white outline

1:72 Yokosuka D4Y Suisei - masks for the national insignia without a white outline from Dead Design, for spraying the Japanese insignia in the rendering without an outline directly onto the camouflage of the model.
In stock
5.60 €
Abrex143XABS-502TG1:43

1:43 Škoda 200RS (1974) - Rallye Škoda 1975 #2 Šedivý - Janeček

1:43 Skoda 200 RS (1974) in the release from the Rallye Skoda 1975 is a finished collector's model of the competition coupe with start number 2 and the crew Sedivy and Janecek. It is not a kit.
In stock
47.80 €
AberABR35L075N1:35

1:35 Germ.75mm barrel for KwK40L/43 with single baffle muzzle brake for Pz.Kpfw. VI, Ausf. F2-early G

A turned replacement barrel for the German 75 mm KwK 40 L/43 gun with a single-baffle muzzle brake, in 1:35, for the Pz.Kpfw. IV Ausf. F2 and early Ausf. G.
In stock
17.96 €
ReskitRSU35-00761:35

1:35 CH-54A Tarhe landing gear (HEAVY LOAD, Universal Military Pod and other) with weighted wheels set for ICM kit

CH-54A Tarhe landing gear for HEAVY load with weighted wheels - metal landing gear legs and resin 3D printed wheels with realistically sagging tires, for the ICM kit in 1:35 scale. It is not a kit of the helicopter but a detail set.
In stock
52.76 €
MASTERAM320291:32

1:32 M61 A1 Vulcan - Six-barrelled rotary 20mm cannon - turned barrels with etched barrel clamps

M61A1 Vulcan – turned barrels for the 20 mm rotary cannon 1:32 from MASTER. Turned metal barrels with photo-etched clamps for a faithful replacement.
In stock
10.76 €
1:35 Patriot Abschussrampe auf 15t mil gl BR A1 3D-Printed & coloured Interior on decal paper (Trumpeter)-25 %Stock ClearanceFavorite
Quinta StudioQD350941:35

1:35 Patriot Abschussrampe auf 15t mil gl BR A1 3D-Printed & coloured Interior on decal paper (Trumpeter)

Quinta Studio 1:35, 3D printed pre-colored interior details on decal paper for the launcher of the Patriot system on the 15t mil gl BR A1 vehicle. Target kit: Trumpeter.
5 leftof 6
30.76 €23.08 € You save 7.68 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.