The razor saw holder vol.II from MH models is the second version of the holder, which according to its name includes the razor saw itself.
Responsibility details are not available.
The second version of the holder for razor modeling saws from MH models. Unlike the basic variant, according to the name the saw itself is part of the package too, so you can get to work straight away.
The saw should do the cutting on its own: run it with light strokes and without pressure. Start with a shallow notch that holds the track and only then lengthen the stroke. Support the part being cut as close to the cut as possible, because otherwise the plastic frays where the blade comes out. Never lever sideways - a thin blade cracks under side loading. Cut away from your body and keep your other hand out of the path of the blade. A razor saw is not intended for hardened metals.
After work, wipe the plastic dust off the blade and off the clamping part, so that the teeth do not clog and the firm grip is not lost. Check that it is tight before putting it away. Store the tool dry, because thin blades are prone to corrosion. The blade is a consumable - as soon as it slips in the cut and you have to press, change it; a blunt blade cuts inaccurately and with a greater risk of slipping.
For the modeler who wants to start cutting right away and does not want to buy a blade for the holder separately. It suits building plastic kits and fine conversions alike, where the accuracy of the cut matters more than speed.
A sharp tool. Keep it out of the reach of children and protect your eyes while working.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
