Resin hose joints 1.6 mm in 1:12 scale from Top Studio. A single-size package of fittings for thicker routing on a model of a motorcycle, it is not a kit.
Responsibility details are not available.
This is not a model, but an accessory for one. The package contains hose joints of a single size, 1.6 mm. The figure of 1.6 mm is not a scale but the diameter of the routing the fittings are cut for; the scale is given by the 1:12 prefix in the name. It is precisely a single-size package that is appreciated at the moment when you have the path of the routing thought out and know that you will run all of it with hose of one diameter.
Where 1.6 mm suits
In 1:12 scale 1.6 mm is among the thicker diameters. It corresponds to what is coarser routing on the real machine: the hoses of the cooling circuit, the fuel feeds, breather intakes or thicker bundles of wiring. For fine brake routing at the calipers, by contrast, thinner diameters suit better, and those are made separately in the same range, from 1.2 mm upward. Anyone who builds a model with the frame exposed and wants the routing graded according to reality usually combines two or three diameters and the matching fittings with them.
First check the real diameter of the hose you have, because even a tenth of a millimeter decides whether the joint holds or floats. Wash the mold release agent off the resin parts. Widen the hole with a micro drill bit in small stages and without pressure, as a thin wall cracks quickly. Dose the glue as super glue, in a minute drop applied with a toothpick, so that it does not wick inside. Paint off the model over a thin base; polished metallic shades of the fittings next to a colored hose raise the result the most. Fit the finished routing only onto a varnished frame and engine.
This is an accessory to a model, not a kit of the motorcycle. The base model, hoses, glue and paints are not included in the package, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!