A supplementary chain set for a model of the Honda NSR500 racing motorcycle in 1:12 scale. It refines the drive of the rear wheel on a finished kit.
Responsibility details are not available.
The Honda NSR500 is a racing road special of the 500 cc class, that is, a machine from the highest category of road Grand Prix racing of the 1980s and 1990s. It is a two-stroke circuit special that was never sold to ordinary customers. What attracts modelers to it is the slender fairing and engineering that largely stays in view: the frame, the exhausts and the drive of the rear wheel.
A chain set for a model of the Honda NSR500 in 1:12 scale. It is aimed at the drive of the rear wheel, that is, at the place that everyone who bends down to a finished model notices. The exact composition of the set, the number of parts and the procedure for assembly are given in the manufacturer's instructions.
First fit the chain dry and try the whole path around both sprockets, and only then glue anything; it is only during this test that it becomes clear how long a section you need and where it will run. If the parts are not polystyrene, an ordinary cement for plastic does not hold on them and the joints should be made with super glue. Before painting, wash and degrease the parts, otherwise the paint will not hold. The upper run of the chain stays taut, while the lower one sags slightly.
The model of the motorcycle, paints and glue are not included in the delivery, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
