MASTER F-104 Starfighter — pitot tube 1:144 — a turned metal replacement pitot tube for a model of the F-104 Starfighter fighter. More accurate and tougher than the plastic part.
Responsibility details are not available.
A turned metal replacement pitot tube in 1:144 scale from the MASTER company, intended for a model of the Lockheed F-104 Starfighter jet fighter. It is not a kit and not a model of the aircraft, but an accurate replacement part taking the place of the soft and easily damaged plastic piece from the original kit. The turned metal tube is finer, perfectly straight and far more resistant to bending and breaking off.
The pitot tube senses air pressure on an aircraft for measuring speed. On the slender Starfighter it is a striking detail on the nose. On models it is a thin protruding feature that on plastic parts often breaks or warps. The metal replacement from MASTER gives the model a fine, scale-accurate detail and is markedly stronger.
Cut off the original plastic part and widen the hole with a fine drill. Glue the metal tube in with cyanoacrylate or a small drop of two-part epoxy. Degrease the part before painting and go over it with a primer for metal so that the paint holds.
This is a replacement detail part, not a model kit. Paints, glue and the model of the aircraft are not included in the package.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
