20% OFF SELECTED BRANDS! EDUARD, KINETIC, SPECIAL HOBBY, CMK & more

1:144 Lockheed F-104 Starfighter

Lockheed F-104 Starfighter is a set of self-adhesive masking templates in 1:144 scale from the manufacturer Peewit. It serves for covering the glazing of a tiny model while spraying.

Scale1:144
Manufacturer Peewit
Product EAN8591111000000

Responsibility details are not available.

4.36 €
3.60 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Lockheed F-104 Starfighter 1:144, a masking set (Peewit)

Precisely cut self-adhesive masks in 1:144 scale from the Czech manufacturer Peewit. In this scale the cockpit of a model is so small that hand lining the frame with a brush practically does not lead to a clean result, and a ready-made mask therefore brings the greatest saving of effort precisely here. The set is neither a kit nor decals, but an accessory to a model that is obtained separately.

The real subject

The Lockheed F-104 Starfighter was a single-engine supersonic aircraft with a very thin and short straight wing and a slim fuselage, adapted for rapid climb and for flight at high speed. In the service of a number of states it filled the role of an interceptor as well as a strike machine and became one of the most widespread Western types of its generation. Characteristic is the long pointed nose and the high-set tail surface, thanks to which the silhouette is recognizable even in a small scale.

Usage tips

Take the small masks off the sheet with the tip of a scalpel and transfer them with smooth-jawed tweezers, so that the film is not dented. Degrease the glazing before sticking them on, as any grease in this scale means the paint flowing under. Seat the mask dry and only then press it down with a piece of wood; with the smallest pieces a rounded stick is proven. Fill in the rest of the glazing that the mask does not cover with thin strips of masking tape. Apply the paint with an airbrush really finely, as a heavy layer in 1:144 swallows the detail of the frame. Before removing the mask, go over the edge with the tip of a knife, so that the paintwork does not tear while being peeled off. Finish the model with gloss clear under the decals and a matte overcoat right at the end.

Who the set is for

  • Builders of models in 1:144 scale
  • Modelers who collect Cold War jet fighters
  • Those who need a crisp cockpit frame without a hand brush
  • Anyone interested in a quick and clean build of a small model

This is an accessory to a model, not a kit. The model, paints and masking tape are not included in the package.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

No, the package contains only masking templates. You buy the model separately.

Yes. In 1:144 the frame of a cockpit is so fine that hand lining with a brush almost always ends in an uneven edge.

Take them off with the tip of a scalpel and transfer them with smooth-jawed tweezers, pressing them down with a rounded stick.

The masks are cut according to the shape of a particular glazing part, so with a model of other origin a small adjustment may be necessary.

Last seen

PeewitPWM1440261:144

1:144 Lockheed F-104 Starfighter

Lockheed F-104 Starfighter is a set of self-adhesive masking templates in 1:144 scale from the manufacturer Peewit. It serves for covering the glazing of a tiny model while spraying.
In stock
4.36 €
Mark IMKA144111:144

1:144 WWII Luftwaffe display base - small

Mark I Luftwaffe — a small display base for models in 1:144 is a printed base reproducing the surface of a Luftwaffe airfield. It serves as a surface under models; it is not a kit.
In stock
1.16 €
PeewitPWM750051:72

1:72 Messerschmitt Bf 109E (AZ model)

The set of spray masks Peewit 1:72 Messerschmitt Bf 109E for quick, clean masking of the canopy and other surfaces of a model.
In stock
3.16 €
ItaleriIT39111:24

1:24 Classic Tanker Trailer

The Classic Tanker Trailer is an injection-molded plastic model of a tanker semi-trailer in 1:24 scale from Italeri. The model is supplied unassembled and unpainted.
In stock
43.16 €
WoodlandWAS5522

Billy Brown's Coupe - HO Scale

A small scene with a coupe under the Billy Brown Coupe designation in HO scale, an accessory for layouts and dioramas.
In stock
23.96 €
Border ModelBD0001-2

Masking Tape 2mm

Border Model masking tape 2 mm — a narrow modeling tape for masking fine lines, curves and intricate transitions between camouflage areas.
In stock
2.20 €
1:48 F-4B ejection seats late-25 %Stock ClearanceFavorite
EduardED6481391:48

1:48 F-4B ejection seats late

Eduard 1:48 F-4B ejection seats (late) is a resin detail set with a pair of ejection seats for sharpening the cockpit of a model of the Phantom II in 1:48 scale. It is not a model but an accessory for an interior.
Last one!of 2
13.80 €10.36 € You save 3.44 €
1:72 SU-122 accessories set
-20 %
Favorite
Black Dog modelBDT721581:72

1:72 SU-122 accessories set

1:72 SU-122 accessories set is an accessory set in 1:72 from Black Dog. It is meant for a model of the Soviet SU-122 self-propelled gun and completes it with cargo and crew kit.
In stock
13.96 €11.17 € You save 2.79 €
1:48 US 20L Jerry Can with Rack
-20 %
Favorite
Firma4949A103/481:48

1:48 US 20L Jerry Can with Rack

US 20L fuel jerrycan with rack 1:48 (Firma49) is a resin accessory for completing American vehicles of the Second World War.
In stock
5.56 €4.45 € You save 1.11 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.