An accessory for a model of an airliner in 1:144 scale: JT8D-15 engines with the thrust reversers in the open position. Intended for the Airfix kit.
Responsibility details are not available.
The JT8D-15 belongs to the family of turbofan engines that powered the airliners of the 1960s to the 1980s. A thrust reverser is a device that, once the aircraft has touched down on the runway, deflects the stream of gases forward and helps to slow it; in the air and when parked it stays stowed, and it is open only for a short while during braking after landing.
An accessory for a model in 1:144 scale with JT8D-15 engines, made with the thrust reversers in the open position. It is prepared for the Airfix kit; which particular kit that is and how to fit the parts are given in the manufacturer's instructions. The set changes one place on a model, so it sits well alongside further accessories and your own modifications.
An open thrust reverser makes sense on a model when the scene matches the moment of braking after landing; on an aircraft standing on the apron it would look out of place, so think out first what scene you are building. Cut off surplus material with a sharp blade a short distance from the part and sand the remainder, so that the part seats on the nacelle without a step. Wash and degrease before painting. Paint the inner surfaces before you close the assembly.
The kit of the aircraft, paints and glue are not part of the delivery, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!