1:144 Yak-11 Vacu Canopy (Mikromir kit)

The Brengun vacuum-formed canopy for the Yak-11 aircraft in 1:144 scale is a clear canopy formed over a mold. It is thinner and cleaner than a molded part — it is not a model of the aircraft.

Scale1:144
Manufacturer Brengun
Product EAN8591111000000

Responsibility details are not available.

4.76 €
3.93 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Vacuum-formed canopy for the Yak-11 in 1:144 scale

A vacuum-formed canopy is made by drawing thin clear film over a mold, so it has a markedly smaller wall thickness than a part molded from plastic. In 1:144 scale, where the whole aircraft is barely a few centimeters long, that difference tells a great deal: the frames look finer and you can really see inside through the canopy. The set from the manufacturer Brengun is intended for the kit of the Yak-11 aircraft in this scale. The number of pieces in the package is stated on the box.

The real subject

The Yak-11 is a single-engine trainer of Soviet design, derived from a wartime fighter. It served for advanced pilot training and spread to a number of countries; characteristic are the long glazed canopy for a crew of two in tandem, the radial engine and the conventional tailwheel landing gear.

How to work with a vacuum-formed canopy

The procedure differs from plastic parts and is worth following. The part is not cut from the film but sanded free: trace the outline with a fine alcohol marker, lay the film on fine-grit abrasive paper placed on a flat board and sand the excess away in a circular motion right down to the parting line. Check as you go whether the edge is even all round — as soon as a hole appears you have sanded too far and have to start again, which is why a spare piece in the package earns its place. It has to be glued with a cement that dries perfectly clear, typically PVA canopy glue or white glass glue; do not use super glue — its fumes will fog the clear film and the canopy will go white. Before gluing, dip the canopy in a polish for clear parts, which evens out fine score marks. Masking can be done with narrow strips of tape or with liquid mask.

Who the accessory is for

  • Collectors of aircraft in 1:144 scale
  • Modelers who are bothered by a thick and inaccurate molded canopy
  • Those who want an open cockpit and a visible interior
  • More experienced modelers — vacuum-formed parts call for a different procedure from plastic

It is a detail accessory, not a model of an aircraft. The base kit, glue and paints are not included in the package. Check that it matches your own kit.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

Never by cutting. The outline is traced with a marker and the excess is sanded away on fine abrasive paper laid on a flat board, right down to the parting line.

A cement that dries perfectly clear — PVA canopy glue or white glass glue. Super glue cannot be used, as its fumes fog the film.

The number of pieces is stated on the box. With vacuum-formed canopies a spare piece comes in handy, because a part can be ruined while sanding.

It is not. It is a detail accessory. The kit of the aircraft has to be obtained separately and checked for a match.

Last seen

BrengunBRL1441681:144

1:144 Yak-11 Vacu Canopy (Mikromir kit)

The Brengun vacuum-formed canopy for the Yak-11 aircraft in 1:144 scale is a clear canopy formed over a mold. It is thinner and cleaner than a molded part — it is not a model of the aircraft.
In stock
4.76 €
Pimp My MiniaturesAFVs35-1411:35

1:35 Sd.Kfz 9 FAMO engine deck with winter canvas cover

1:35 engine deck with a winter canvas cover for the Sd.Kfz. 9 FAMO is a 3D-printed resin accessory of the covered engine compartment with a rolled canvas for models of the heavy artillery tractor Sd.Kfz. 9 FAMO in 1:35 scale.
In stock
12.76 €
Art ScaleASKT0083

Lead Wire - Halfround 1,2 mm x 140 mm (cca. 14 pcs)

The Art Scale lead wire, half-round section 1.2 x 140 mm (about 14 pcs) is a heavier soft wire for prominent cables, hoses and lines on models.
In stock
3.96 €
Firma4949H014/161:16

1:16 Helmet M38 Fallschirmjäger (detail)

Firma49 1:16 German M38 Fallschirmjäger helmet is a 3D-printed resin accessory, a faithful scaled-down version of the helmet of German paratroopers of the Second World War.
In stock
5.56 €
AiresAIR20411:32

1:32 Bf 109K Radio equipment

Aires 1:32 Bf 109K Radio equipment is a resin detail set of radio equipment for complementing the interior of a Messerschmitt Bf 109K kit.
In stock
25.60 €
MAiMMAIM355991:35

1:35/Uniscale Round Fan Grille Set (3pcs)

Round fan grilles (3 pieces) in 1:35/Uniscale from MAiM : a diorama accessory for livening up the walls of buildings, bunkers and industrial structures.
In stock
13.16 €
PANZER ARTRE35-0191:35

1:35 Late Drive Wheels for PzIII/StuGIII

1:35 Late drive wheels for the PzIII/StuGIII is a resin set of replacement drive sprockets from PANZER ART. It is an aftermarket accessory, not a model.
In stock
5.56 €
Green Stuff WorldGSW7583

7x Mix 16mm Dice - Clear Green/Yellow

7x Mix 16mm Dice - Clear Green/Yellow is a seven-piece set of gaming dice 16 mm in size in a transparent build, in green and yellow. The designation Mix means that the set brings together dice of different types.
In stock
6.36 €
AiresAIR73291:72

1:72 JAS-39C Gripen exhaust nozzle - opened position

A resin detail set of the JAS-39C Gripen exhaust nozzle in the open position in 1:72 scale from Aires. It refines the nozzle of the Swedish fighter; it is not an airplane model.
In stock
10.80 €
KelikRSK32-00251:32

1:32 Mirage 2000D/N - interior 3D decals for Kitty Hawk/Zimi models kit

Kelik 1:32 - the cockpit interiors of the Mirage 2000D and 2000N is a set of 3D decals with relief that replace the laborious painting of instrument panels and side consoles. The set is prepared for Kitty Hawk and Zimi Models kits. The aircraft kit is not included.
In stock
53.56 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.