1:16 American helmet M1

1:16 American helmet M1 is an accessory for figures at the large 1:16 scale: the American M1 steel helmet. It is not a whole figure and not a model but a part to be fitted and painted.

Scale1:16
Manufacturer Firma49
Product EAN8591111037518

Responsibility details are not available.

5.96 €
4.93 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

1:16 American helmet M1 — an American helmet for figures in 1:16 scale

This is an accessory for figures at the large 1:16 scale, not a model and not a whole figure. At 1:16 a helmet is large enough for the quality of the clean-up and the painting to show, so it is worth spending time on it: on a finished figure the headgear is the first thing a viewer sees. The accessory is used to replace a less successful original part or to convert a character to another army and period.

The real subject

The M1 helmet was the standard American steel helmet from the Second World War until the 1980s, when a helmet in composite materials replaced it. It consisted of an outer steel shell and an inner liner with a webbing suspension; the liner could also be worn on its own as light headgear. The rounded shape of the shell with its slightly rolled rim and the chin strap, which was often worn undone or slung over the rim, are characteristic.

Fitting, cleaning up and painting

Free the part of casting remnants and flash, level the mating face and degrease the surface. Try the fit on the head of the figure dry and, if need be, sand the inside back slightly so that the helmet sits naturally and does not look too high. Bond it with cyanoacrylate glue and fill the seam with putty or a modeling compound. Apply a thin primer before painting. The finish on real helmets had a finely grainy, non-glossy surface, which at this scale can be suggested with a textured paint or a very fine dusting in the base. After the base olive color, a dark wash under the rim and around the strap and light chipping on the edges, where the paint wore first, will help.

Who the accessory is for

  • For figure modelers working at the large 1:16 scale.
  • For modelers converting a figure to American equipment.
  • For builders of busts and vignettes, where the headgear is the main detail.
  • For anyone who is not happy with the helmet supplied with the base figure.

The accessory is supplied unpainted and without a figure. Paints, glue, putty and the figure itself are not included in the package, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

No. It is a separate accessory for figures; the figure has to be bought as well.

Check the number of pieces on the box.

The subject is the American M1 helmet. Check on the box whether the package also contains the inner liner.

Apply a thin primer, then a flat olive color, a dark wash under the rim and around the strap and light chipping on the edges. The surface of a real helmet was not glossy.

Last seen

Firma4949H009/161:16

1:16 American helmet M1

1:16 American helmet M1 is an accessory for figures at the large 1:16 scale: the American M1 steel helmet. It is not a whole figure and not a model but a part to be fitted and painted.
In stock
5.96 €
HGWHGW5320171:32

1:32 Dark Wood

A printed sheet with dark wood grain in 1:32 scale. A wet transfer from which you cut the pieces as you need them.
In stock
7.12 €
GasPatch modelsGP19-722051:72

1:72 Browning Cal. 50 Fixed (2 Items)

The .50 caliber Browning in the fixed form, 1:72 scale — a resin set from GasPatch models with two machine guns to replace the plastic parts in a kit.
In stock
5.96 €
WoodlandWCW4515

Surface Water - Water Ripples

A clear preparation for making ripples and a rippled surface. It is applied transparent and it dries transparent too, so it does not change the color of the water under it.
In stock
18.76 €
1:48 A-10C Thunderbolt II TFace-25 %Stock ClearanceFavorite
EduardEX10501:48

1:48 A-10C Thunderbolt II TFace

A set of self-adhesive masking templates from the TFace range for a model of the A-10C Thunderbolt II attack aircraft in 1:48 scale.
3 leftof 5
9 €6.76 € You save 2.24 €
Firma4949F014/721:72

1:72 French Kepi

A French kepi in 1:72 scale is an accessory for figures. It is put on in place of a helmet or other headgear on figures in French dress.
In stock
4.36 €
EduardED6489801:48

1:48 Su-25 gun muzzle 3D-Printed

Eduard 1:48 Su-25 gun muzzle is a 3D-printed cannon muzzle for a model of the Su-25 Frogfoot attack aircraft.
In stock
3 €
ZvezdaZV90051:100

1:100 Caravel

A plastic kit of the caravel Niña from the first expedition of Christopher Columbus, 1:100 scale. The model is supplied unassembled and unpainted.
In stock
23.16 €
TechmodTECH721261:72

1:72 TBM-3 Avenger

Decals for the TBM-3 Avenger carrier torpedo aircraft in 1:72. Three machines of the year 1945 in the three-color naval scheme.
In stock
5.96 €
MontexMXK323711:32

1:32 P-40K HASEGAWA

Montex 1:32 P-40K is a set of pre-cut self-adhesive masks for modelers, not a kit. The masks match the glazing of the Hasegawa kit.
In stock
11.56 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.