An etched instrument panel in 1:72 scale for a model of the MiG-21F-13. According to the name it is cut for the kit by the brand Revell.
Responsibility details are not available.
The MiG-21F-13 is one of the first production forms of the single-seat supersonic MiG-21 fighter. It is told from the later versions by its slimmer spine and different glazing, and it spread beyond the Soviet Union as well. The cockpit of these machines is fairly cramped and the instrument panel forms the dominant feature in it, clearly visible through the finished canopy.
In 1:72 scale kits the instrument panel tends to be only a flat area with a hint of relief, because finer engraving cannot be got into plastic at this size. An etched panel of thin metal has the outlines of the dials crisp and legible, so that the cockpit does not come across as empty once it is built up. What exactly the set contains and how to proceed with it are given by the instructions enclosed by the manufacturer; according to the name it is intended for the kit by the brand Revell, so with other kits check the dimensions first.
The panel is fitted into the cockpit before the fuselage is glued together, so try it dry in good time. The original plastic part usually needs thinning or leveling, so that the new part settles and the fuselage can be closed. Cut the part off the carrier sheet with a sharp blade on a hard surface and level the remaining tab with a file. Etched metal is not polystyrene; it is glued with super glue. Before painting, wash and degrease the metal and start with a primer, otherwise the paint will not hold.
What is supplied is the etched part. The kit, paints and glue are not part of the delivery, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!