Adjustable Jewelers Saw is an adjustable jeweler's saw with a frame for thin saw blades; it cuts accurately and with a minimum of material removed.
Responsibility details are not available.
A jeweler's saw is a hand saw with a bow frame into which a thin saw blade is clamped. The frame is adjustable, so it can be matched to the length of the blade and to its tension, and it is the tension that decides whether the blade leads the cut straight or wanders. For a modeler it is a tool for places where a knife is not enough and a circular saw would take off too much material.
Tension the blade so that it gives a clear note when flicked; a slack blade twists in the cut and breaks. Hold the saw upright, with the teeth pointing down toward the handle, and cut on the downward pull, as the return movement is only a return and not a cut. Do not press; it is the stroke that decides the speed, not force. Clamp the material in a vise or brace it against a bench pin so that it does not vibrate in the cut, as chatter is the quickest route to a broken blade.
Work with eye protection, as a broken thin blade will fly off. Keep your hands clear of the path of the cut and never put a loaded saw down so that the blade overhangs the edge of the table.
For modelers who work with metal, brass and stock sections: builders of ships, railroad models and conversions, and for anyone who needs to shorten material accurately without much loss. Saw blades are a separate item.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!