Přidali jsme nové modely do výprodeje za skvělé ceny! | ENG: We've added new model kits to our sale at great prices!
Rolls-Royce RB211-22 engines of the early version for the Lockheed L-1011 TriStar in 1:144 scale make up an add-on set that replaces the nacelles on a kit.
Responsibility details are not available.
This is an add-on for a model, not an aircraft kit. On airliners in a small scale the engine nacelles belong among the most conspicuous parts: they are large, smooth and the eye looks for them first, so any simplification of their shape shows. Replacement nacelles are therefore among the most rewarding modifications that can be made to an airliner model, and unlike cutting into the wing they call for no structural work.
The Lockheed L-1011 TriStar was a wide-body three-engine aircraft whose third engine sits in the rear fuselage and draws air through an S-shaped duct below the root of the vertical tail. Rolls-Royce developed the three-shaft RB211-22 turbofan engine for it, and the two designs were so closely linked that neither made sense without the other. The early version of the powerplant differs from the later one in details, which is why the brand keeps both as separate sets.
A closed nacelle stands and falls with the quality of the surface. Once the casting blocks are removed, go over the casting with your fingers and against the light, even out the small irregularities with a sanding sponge and finally polish the surface with fine paper or a polisher. Only then comes the primer, which shows the imperfections one last time and cheaply. A smooth surface is a condition on airliners, because the gloss company liveries forgive nothing and a matte coat would kill the whole effect.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!