Wheels in the Fifteen52 Outlaw 001 pattern with a three-piece rim 19 inches in diameter, including tires in the Stance form. 1:24 scale.
Responsibility details are not available.
Fifteen52 is a make of wheels for modified cars and Outlaw 001 is the designation of one of its patterns. The abbreviation 3pc in the name refers to the three-piece build of the rim on the subject: the center is joined to an inner and an outer hoop by bolts around the circumference, which is a solution typical of custom wheels. A nineteen-inch diameter corresponds in 1:24 scale to roughly 20 mm.
According to the name, both wheels and tires described as Stance are included. The set thus replaces a whole wheel from a kit, shoes and all, and is intended for builds in the spirit of low-seated modified cars. The extent of the package, how the parts are divided and the recommended glue are given in the instructions enclosed by the manufacturer.
Seat the wheel dry and check the diameter, the width and the track against the arches of the model; with low-seated builds the seating of the axle tends to need working. Cut the excess material away with a sharp blade a little from the part and sand the remainder level. Wash and degrease before painting. The center of the rim and the hoop often differ in shade on three-piece wheels, so it pays to separate the two parts by masking and to leave the lip with the bolts lighter.
The set is for modelers who build modern modified automobiles in 1:24 scale and want to bring the wheels into line with the overall conception of the car. It is an accessory to building a model: paints, glue and tools do not belong to it, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
