Wheels in a custom conception of the RSR pattern 19 inches in diameter for models of Porsche cars in 1:24 scale.
Responsibility details are not available.
The abbreviation RSR is associated with the racing versions of the Porsche 911, and the addition Custom in the name says that this is a custom-conceived wheel pattern and not an exact copy of a factory part. A nineteen-inch diameter corresponds in 1:24 scale to roughly 20 mm, so the wheel comes across as full in the arch and the sidewall of the tire stays low.
The set brings wheels in this form as a replacement for the parts from a kit. It will find use on builds of sporting cars to which the wheel is to give a racing expression, and on modifications where the car is to be seated lower. The extent of the package, how the parts are divided and the recommended glue are given in the instructions enclosed by the manufacturer.
Seat the wheels dry and check the diameter, the width and the track against the arches of the model; with sporting builds the seating of the axle tends to need working, so that the car sits lower. Cut the excess material away with a sharp blade a little from the part and sand the remainder level. Wash and degrease the parts before painting. A uniform rich shade with clean edges becomes racing wheels; it is enough to limit the lift to the hollows at the center.
The set is for modelers who build sporting automobiles in 1:24 scale and want wheels in a racing spirit. It is an accessory to building a model: paints, glue and tools do not belong to it, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
