LAST CHANCE! 20% OFF Ends Tonight!
1:24 Supermarine Spitfire Mk.IX Collection Pt. 2

1:24 Supermarine Spitfire Mk.IX Collection Pt. 2

11.96 €
Add to Cart

1:24 Supermarine Spitfire Mk.IX Collection Pt. 2

The decal sheet Xtradecal 1:24 Supermarine Spitfire Mk.IX Collection Pt. 2 brings markings for a large-scale model of the British fighter - the second part of the collection.

Scale1:24
Manufacturer Xtradecal
Product EAN9591111000054

Responsibility details are not available.

11.96 €
9.88 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Xtradecal 1:24 Supermarine Spitfire Mk.IX Collection Pt. 2 - decals

This is not a kit, but a decal sheet for a model of the Supermarine Spitfire Mk.IX in 1:24 scale. The Collection Pt. 2 designation means that this is the second part of a collection of markings for the same type - the sheet is therefore a separate accessory that widens the choice of schemes beyond what a kit usually holds. The 1:24 scale is exceptional among aircraft models: the model has dimensions that can carry detail, and the decals on it are highly visible, so the quality of the printing and the registration play a greater role than in the small scales.

The real subject

The Spitfire Mk.IX came about as a quick answer to the new German fighters - the proven airframe of the earlier version was given a more powerful Rolls-Royce Merlin engine with a two-stage supercharger. The result was a variant that restored the type's competitiveness in performance at high altitude and became one of the most numerously produced versions of the whole family. Mk.IX machines served with a number of Allied air forces and carried very varied color schemes and markings, which makes them a rewarding subject for separate decal sheets in particular.

Tips for applying the decals

The surface under a decal has to be smooth and glossy - a matte varnish contains microscopic irregularities, under which silvering will appear. Cut the sheet close to the artwork, soak it in lukewarm water for a few seconds and leave it to rest on a paper towel until the backing starts to slide freely. Move the decal into place with a brush, draw the excess water off with a towel and use a decal softener, so that the film settles into the engraved lines and the rivets. In a large scale, work in sections and watch that a large area of film does not fold over anywhere. Finally, overcoat with a matte or semi-gloss varnish according to the character of the surface.

Who the sheet is for

  • builders of large-scale 1:24 models
  • modelers who want markings for the Spitfire Mk.IX other than those from the kit
  • collectors of decal sheets for a single type
  • more experienced modelers who can handle working with large decals

The package contains decals only. The model, paints and glue are not included, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

The name specifies the type, the scale and the fact that this is the second part of the collection. Check the number of schemes and the particular machines on the packaging of the sheet.

You do not. Each part of the collection is a separate sheet with its own selection of markings.

Always apply them over a gloss varnish, not a matte one, and use a decal softener. Once dry, overcoat the surface to the degree of sheen you want.

Last seen

XtradecalX240051:24

1:24 Supermarine Spitfire Mk.IX Collection Pt. 2

The decal sheet Xtradecal 1:24 Supermarine Spitfire Mk.IX Collection Pt. 2 brings markings for a large-scale model of the British fighter - the second part of the collection.
In stock
11.96 €
RT-DioramaRT359561:35

1:35 Industry arched windows No.: 12 (3 pcs)

1:35 Industry arched windows No.: 12 (3 pcs) is a diorama accessory from RT-Diorama - according to the name three arched window elements for an industrial set piece in 1:35 scale.
In stock
5.56 €
Pelikán4SH0036

Catapult Glider vystřelovací házedlo

Catapult Glider from Pelikan is an all-balsa free-flight glider carrying a small model of a space shuttle orbiter on its back. A catapult for launching is in the package too.
In stock
5.56 €
1:48 A-7E Corsair II cockpit set - (late version)
-20 %
Favorite
AiresAIR45081:48

1:48 A-7E Corsair II cockpit set - (late version)

The A-7E Corsair II cockpit set — late version 1:48 (Aires) is a resin detail cockpit set for a build of the LTV A-7E carrier-based attack aircraft. It is not an airplane model but an accessory for a kit.
In stock
16.80 €13.44 € You save 3.36 €
AirfixAX01302V1:76

1:76 Panther Tank Vintage Classics

Panther Tank 1:76 (Vintage Classics) is a plastic kit of the German Pz.Kpfw. V Panther medium tank from Airfix, a reissue of a classic mold in the small 1:76 scale.
In stock
7.96 €
FineMoldsFP729521:72

1:72 U.S. Air Force F-15D Fighter

An injection-molded plastic kit of the F-15D Eagle of the US Air Force (USAF) in 1:72 scale from the Japanese manufacturer FineMolds. The two-seat version of the famous heavy fighter, a limited edition.
In stock
39.96 €
Young MiniaturesYMYM18251:10

1:10 German Infantry Russian Front WWII

1:10 German Infantry Russian Front WWII is a resin portrait bust from Young Miniatures in 1:10 scale. It is supplied unassembled and unpainted, and the main share of the work lies in the painting.
In stock
50.76 €
RT-DioramaRT358241:35

1:35 Printed Accessories: Wallpaper Nr.9

1:35 Printed Accessories: Wallpaper Nr.9 is a printed diorama accessory in 1:35 scale with a wallpaper subject for interior walls. It serves for fitting out a scene; it is not a kit.
In stock
3.96 €
DSPIAEDS56015-30

Tungsten Steel Drill Bit 3.0mm for Plastic Models

The DSPIAE 3.0 mm tungsten steel drill bit is the heaviest diameter of the modeling range. It is used mainly for larger holes and for anchoring a finished model to a display base.
In stock
2.36 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.