Masks for the HC-2 Heli Baby in 1:72 scale (Peewit) are pre-cut self-adhesive stencils for the glazing. It is not a helicopter kit.
Responsibility details are not available.
Note that this is not a model of the helicopter but a set of masking stencils. The Czech brand Peewit makes pre-cut self-adhesive masks for plastic models, typically for cockpit frames and wheels. On a light helicopter the cockpit glazing is fairly large and the frames are thin, so a mask cuts short work that takes hours with a brush and rarely comes out clean.
The HC-2 Heli Baby is a Czechoslovak light helicopter of the 1950s, the result of home development at a time when helicopter engineering was still finding its way. It was a small two-seat machine with a glazed cockpit and a tubular load-bearing structure, intended for training and trials. Only a small number of machines were built and no series service came of it, yet it is a piece of Czechoslovak aviation history that appears in the modeling range only rarely. The glazed cockpit is its most conspicuous feature.
Apply the masks to clean, degreased glazing and press them down with a stick or tweezers so that no paint runs under the edge. Spray the frames with the interior color first and only then with the exterior shade. Apply the paint in several thin coats; a thick coat tears when the mask is lifted. Remove the mask while the paint is merely dry, not fully cured. On a helicopter with a glazed cockpit finish the interior before the glazing, because once it is seated you can no longer reach it.
The set contains masks only. The kit, glue and paints are not included in the package, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!