1:32 5 COLOR FUSELAGE LOZENGE FOR FOKKER D. VII (FOKK. ) WNW KIT, INTERIOR LOZENGE INCLUDED

1:32 5 COLOR FUSELAGE LOZENGE FOR FOKKER D. VII (FOKK. ) WNW KIT, INTERIOR LOZENGE INCLUDED

11.96 €
Add to Cart

1:32 5 COLOR FUSELAGE LOZENGE FOR FOKKER D. VII (FOKK. ) WNW KIT, INTERIOR LOZENGE INCLUDED

Five-color lozenge for the fuselage of the Fokker D.VII in 1:32 scale from the Old Propeller brand. The sheet is cut for machines from the production of the parent Fokker works and includes the interior pattern as well.

Scale1:32
Manufacturer Old Propeller
Product EAN8591111000000

Responsibility details are not available.

11.96 €
9.88 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Old Propeller 1:32 five-color lozenge for the fuselage of the Fokker D.VII from Fokker production, with the interior pattern

A sheet of decals in 1:32 scale for the fuselage of a Fokker D.VII built at the parent works. According to the name of the product this is the five-color variant of the camouflage pattern, and the sheet also includes interior lozenge, that is, the pattern for the surfaces visible from inside. It is not a kit but an accessory to a model.

The real subject

The fuselage of the Fokker D.VII consisted of a welded frame of steel tubes covered with fabric, unlike the wooden shells the competition used. The covering was made of pre-printed lozenge camouflage cloth, and because it was fabric on the inside as well, the pattern was visible in the cockpit area too. It is precisely this detail that tends to be overlooked on models, even though with an open cockpit in 1:32 scale it is clearly apparent. The demand for the type led to license production at Albatros and at the branch Ostdeutsche Albatros Werke, and machines from the individual works differed in the execution of the covering.

Application tips

A fuselage is not a flat board but a broken-up surface with longitudinal stringers, transitions and openings. So always lay a decal onto it wet and shape it gradually: first seat it against one reference edge, then let the film relax with a softener and only after that draw it slowly into the recesses. Where an excess fold appears, prick the film with the tip of a needle and let a drop of softener settle it; do not pull on it. Apply the interior pieces to the inner sides of the fuselage before the halves are glued together, as on a finished model you can no longer reach them.

Who the sheet is for

  • Builders of the Fokker D.VII in 1:32 scale
  • Modelers building a machine from the production of the parent works
  • Builds with an open cockpit, where the inner covering is visible
  • Completing or replacing the sheet from a kit

These are decals, that is, an accessory to a kit. The kit, the paints, the clear coat and the softener are not included in the package.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

The pattern for the surfaces of the covering visible from inside, mainly around the cockpit. According to the name of the product it is part of the sheet.

Before the fuselage halves are glued together. On a finished model you can no longer reach the inner surfaces.

No. According to the name it is intended for the fuselage. The wings are dealt with by a separate sheet.

Gradually and wet. Let the softener relax the film, and prick any fold with a needle and let it settle.

Last seen

Old PropellerOPD32015W1:32

1:32 5 COLOR FUSELAGE LOZENGE FOR FOKKER D. VII (FOKK. ) WNW KIT, INTERIOR LOZENGE INCLUDED

Five-color lozenge for the fuselage of the Fokker D.VII in 1:32 scale from the Old Propeller brand. The sheet is cut for machines from the production of the parent Fokker works and includes the interior pattern as well.
In stock
11.96 €
Star DecalsSD35-C12511:35

1:35 Vietnam # 1. ARVN M41 Walker Bulldog and M48A3 Patton in South Vietnam army.

Decals for the ARVN M41 Walker Bulldog and M48A3 Patton tanks in 1:35 scale from the brand Star Decals. The first part of a range devoted to the markings of the South Vietnamese army.
In stock
10.76 €
1:48 AGM-142 Have Nap missile for F-4, F-15, F-16, F-111 (2 pcs)-25 %Stock ClearanceFavorite
ReskitRS48-01461:48

1:48 AGM-142 Have Nap missile for F-4, F-15, F-16, F-111 (2 pcs)

The AGM-142 Have Nap in 1:48 scale is a set of two resin guided missiles for completing kits of the F-4, F-15, F-16 and F-111. It is not an airplane model but separate underwing armament for finishing a build.
2 left
15.16 €11.36 € You save 3.80 €
1:24 Nissan Bluebird 4Door Sedan SSS-R (U12) -25 %Stock ClearanceFavorite
HasegawaHA204701:24

1:24 Nissan Bluebird 4Door Sedan SSS-R (U12) "1988 All Japan Rally"

A plastic kit of the four-door Nissan Bluebird SSS-R sedan of the U12 generation in 1:24 scale, in a sporting competition form.
Last one!of 5
36.76 €27.56 € You save 9.20 €
Aires/QuickboostQB321121:32

1:32 F-86F Sabre pitot tube

Aires/Quickboost F-86F Sabre pitot tube in 1:32 scale. A resin replacement pitot tube for refining a plastic model of the North American F-86F Sabre jet fighter.
In stock
4.76 €
1:48 Vought F4U-2 Corsair TFace-25 %Stock ClearanceFavorite
EduardEX10811:48

1:48 Vought F4U-2 Corsair TFace

The 1:48 Vought F4U-2 Corsair TFace set of painting masks from the Czech maker Eduard deals with the cockpit glazing from the outside and the inside alike. An accessory for modelers who want crisp framing without the labor of cutting tape.
6 left
10.40 €7.80 € You save 2.60 €
KelikRSK32-00241:32

1:32 Mirage 2000C - interior 3D decals for Kitty Hawk/Zimi models kit

A pre-colored 3D decal of the Mirage 2000C interior in 1:32 scale from Kelik - a relief decal of the cockpit for the Kitty Hawk kit. It is not an aircraft model.
In stock
26.76 €
Bravo 6B6-350531:35

1:35 US Army Infantry (4) K-9 Team

Bravo 6 1:35 US Army Infantry (4) K-9 Team is a set of unpainted resin figures in 1:35 scale with a dog handler and a service dog from the period of the war in Vietnam as its subject.
In stock
31.96 €
TrumpeterTR022021:32

1:32 F-105G Thunderchief

A large injection-molded plastic kit of the Republic F-105G Thunderchief Wild Weasel in 1:32 scale from the manufacturer Trumpeter - the American two-seat machine for destroying enemy radars.
In stock
77.16 €
1:350 SH-60J Sea Hawk-25 %Stock ClearanceFavorite
TrumpeterTR062531:350

1:350 SH-60J Sea Hawk

The plastic set SH-60J Sea Hawk 1:350 from Trumpeter contains small shipboard helicopters intended for placing on models of warships in 1:350 scale.
Last one!of 4
5.56 €4.16 € You save 1.40 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.