1:35 Vietnam # 1. ARVN M41 Walker Bulldog and M48A3 Patton in South Vietnam army.

1:35 Vietnam # 1. ARVN M41 Walker Bulldog and M48A3 Patton in South Vietnam army.

10.76 €
Add to Cart

1:35 Vietnam # 1. ARVN M41 Walker Bulldog and M48A3 Patton in South Vietnam army.

Decals for the ARVN M41 Walker Bulldog and M48A3 Patton tanks in 1:35 scale from the brand Star Decals. The first part of a range devoted to the markings of the South Vietnamese army.

Scale1:35
Manufacturer Star Decals
Product EAN8991111442724

Responsibility details are not available.

10.76 €
8.89 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Vietnam decals in 1:35 scale, ARVN tanks

The first part of a range focused on the markings of the South Vietnamese army, known in English by the abbreviation ARVN. According to the name the sheet is meant for two tanks: the light M41 Walker Bulldog and the medium M48A3 Patton. You are buying the markings alone, which are applied to a finished model, not parts or a kit. The 1:35 scale matches the kits usually available for both types.

The real subject and the markings

The M41 Walker Bulldog was a postwar American light tank laid out mainly for reconnaissance, with a 76 mm gun and a low weight thanks to which it moved well in soft ground. The M48A3 Patton is a considerably heavier medium tank against it, with a 90 mm gun and a diesel engine that replaced the older gasoline powerplant. Both vehicles were common in the South Vietnamese army and formed the core of its armored units. The markings tended to be rounded out with lettering in the local language and bold unit symbols.

Application tips

Both tanks have a rounded cast turret, so marks placed on the side of the turret need more careful preparation than they would on a flat hull. Level the area with a gloss varnish and go by the manufacturer's instructions when laying them on. Once fixed with a matte varnish, the model benefits from a bold layer of dust on the running gear and the fenders, which matches service in a tropical setting.

Who the set is for

  • builders of South Vietnamese army vehicles
  • modelers of the M41 Walker Bulldog and M48A3 Patton tanks
  • anyone interested in armored units in Southeast Asia
  • collectors of decal sheets from this range

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

It is the English abbreviation for the army of South Vietnam, which the name of the set gives as well.

The M41 Walker Bulldog is a light reconnaissance tank with a 76 mm gun; the M48A3 Patton is a heavier medium tank with a 90 mm gun.

It is not. This is a standalone sheet of decals; the kit and the paints have to be bought separately.

Level the area beforehand with a gloss varnish and go by the manufacturer's instructions, or the mark will not bed down on the curve.

Last seen

Star DecalsSD35-C12511:35

1:35 Vietnam # 1. ARVN M41 Walker Bulldog and M48A3 Patton in South Vietnam army.

Decals for the ARVN M41 Walker Bulldog and M48A3 Patton tanks in 1:35 scale from the brand Star Decals. The first part of a range devoted to the markings of the South Vietnamese army.
In stock
10.76 €
1:48 AGM-142 Have Nap missile for F-4, F-15, F-16, F-111 (2 pcs)-25 %Stock ClearanceFavorite
ReskitRS48-01461:48

1:48 AGM-142 Have Nap missile for F-4, F-15, F-16, F-111 (2 pcs)

The AGM-142 Have Nap in 1:48 scale is a set of two resin guided missiles for completing kits of the F-4, F-15, F-16 and F-111. It is not an airplane model but separate underwing armament for finishing a build.
2 left
15.16 €11.36 € You save 3.80 €
1:24 Nissan Bluebird 4Door Sedan SSS-R (U12) -25 %Stock ClearanceFavorite
HasegawaHA204701:24

1:24 Nissan Bluebird 4Door Sedan SSS-R (U12) "1988 All Japan Rally"

A plastic kit of the four-door Nissan Bluebird SSS-R sedan of the U12 generation in 1:24 scale, in a sporting competition form.
Last one!of 5
36.76 €27.56 € You save 9.20 €
Aires/QuickboostQB321121:32

1:32 F-86F Sabre pitot tube

Aires/Quickboost F-86F Sabre pitot tube in 1:32 scale. A resin replacement pitot tube for refining a plastic model of the North American F-86F Sabre jet fighter.
In stock
4.76 €
1:48 Vought F4U-2 Corsair TFace-25 %Stock ClearanceFavorite
EduardEX10811:48

1:48 Vought F4U-2 Corsair TFace

The 1:48 Vought F4U-2 Corsair TFace set of painting masks from the Czech maker Eduard deals with the cockpit glazing from the outside and the inside alike. An accessory for modelers who want crisp framing without the labor of cutting tape.
6 left
10.40 €7.80 € You save 2.60 €
KelikRSK32-00241:32

1:32 Mirage 2000C - interior 3D decals for Kitty Hawk/Zimi models kit

A pre-colored 3D decal of the Mirage 2000C interior in 1:32 scale from Kelik - a relief decal of the cockpit for the Kitty Hawk kit. It is not an aircraft model.
In stock
26.76 €
Bravo 6B6-350531:35

1:35 US Army Infantry (4) K-9 Team

Bravo 6 1:35 US Army Infantry (4) K-9 Team is a set of unpainted resin figures in 1:35 scale with a dog handler and a service dog from the period of the war in Vietnam as its subject.
In stock
31.96 €
TrumpeterTR022021:32

1:32 F-105G Thunderchief

A large injection-molded plastic kit of the Republic F-105G Thunderchief Wild Weasel in 1:32 scale from the manufacturer Trumpeter - the American two-seat machine for destroying enemy radars.
In stock
77.16 €
1:350 SH-60J Sea Hawk-25 %Stock ClearanceFavorite
TrumpeterTR062531:350

1:350 SH-60J Sea Hawk

The plastic set SH-60J Sea Hawk 1:350 from Trumpeter contains small shipboard helicopters intended for placing on models of warships in 1:350 scale.
Last one!of 4
5.56 €4.16 € You save 1.40 €
MAiMMAIM35H00591:35

1:35 Screaming Faces - Character Head Set (7 Heads)

MAiM Screaming Faces, a set of character heads 1:35 (7 pieces) , are resin replacement heads with the expression of screaming faces for improving and converting figures.
In stock
13.16 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.