1:32 Captured Butcherbirds part 5 decals from the brand KARAYA are a standalone sheet of water-slide decals with the markings of captured Focke-Wulf Fw 190 machines. It is not a kit but an accessory for a model in a large scale.
Responsibility details are not available.
A sheet of water-slide decals in the large 1:32 scale, intended for marking a finished model of the Focke-Wulf Fw 190 fighter. The set belongs to a multi-part series devoted to captured machines, that is, aircraft that fell into the hands of an opponent and were remarked for test flying. It is an accessory, not a kit: the model of the aircraft, the paints and the varnish are not included in the package.
The Focke-Wulf Fw 190 is a single-engine all-metal low-wing fighter. The versions of the A series were powered by an air-cooled twin-row radial engine, which gave the aircraft a characteristically short and massive nose with a large propeller spinner; the later series received a liquid-cooled inverted V12 engine and a lengthened nose. The nickname Butcherbird came about as a translation of the German name of the type. Captured machines are attractive to modelers precisely because of their markings: the original factory finish is usually oversprayed or merely supplemented with new national insignia and serial numbers, so two layers of markings coexist on one aircraft. For a builder it is a purely painting and decaling task, not the usual combination from a box.
The 1:32 scale gives large decals that are easy to handle, but every imperfection is all the more visible. The base has to be smooth and glossy, otherwise a silvery veil appears around the carrier film. Cut the subject out close to the printing, soak it for ten to thirty seconds in lukewarm water and let it rest until it floats freely on the paper. Settle it on a drop of water, line it up against the engraved lines and press the excess out with a soft brush from the center outward. Large national insignia across engraved panels and riveted seams need a decal softener: it is applied onto a positioned decal, the film wrinkles and during drying settles into the relief by itself. Until then do not touch it. Once it is perfectly dry, seal the surface with a clear coat, which levels the edges of the film and prepares the area for weathering.
This is a standalone decal sheet, not a kit. The model of the aircraft, paints, varnish and a decal softener are not included in the package, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!