LAST CHANCE! 20% OFF Ends Tonight!
1:32 F/A-18A++ 3D-Printed & coloured Interior on decal paper (Academy) (Small version)

1:32 F/A-18A++ 3D-Printed & coloured Interior on decal paper (Academy) (Small version)

14.08 €
Add to Cart

1:32 F/A-18A++ 3D-Printed & coloured Interior on decal paper (Academy) (Small version)

Quinta Studio 1:32 F/A-18A++ 3D interior decals are a pre-colored 3D set on decal paper that replaces hand painting of the instrument panel and the cockpit side consoles. Intended for the Academy kit.

Scale1:32
Manufacturer Quinta Studio
Product EAN5591111000009

Responsibility details are not available.

18.76 € 14.08 €
11.64 € without VAT
−25 % You save 4.68 €
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Quinta Studio 1:32 F/A-18A++ 3D interior decals

This is a set of three-dimensional (3D) decals for the interior of the single-seat Hornet in 1:32 scale. The elements are printed and colored in production, they carry a raised relief of buttons, switches and display bezels, and they are applied on decal paper directly onto the cockpit parts from the kit. The result reads better than brush painting and has more depth than a flat photo-etched part. In the name the set is listed as the smaller version, so expect it to cover a narrower selection of surfaces than the full version. The target kit is Academy.

The real subject

The F/A-18 Hornet is a twin-engine carrier-based multirole aircraft with the distinctive leading-edge extensions at the wing roots. The A++ designation belongs to machines of the early single-seat series that went through a further equipment upgrade and served with the US Marine Corps. The panel layout in the cockpit of these machines differs from the later series, and that is exactly the state the set captures.

Application tips

The 3D decals are released from the backing paper in water like a decal: the element is soaked for about fifteen seconds in lukewarm water and slid off the paper into place, where it holds on gloss varnish. Do not use a decal softener or setter at all, they would attack the printed resin. Follow the instructions supplied with the set. In general the surface should be clean, degreased and perfectly dry, the elements are placed with tweezers and it pays to check the fit dry beforehand. The segments are thin, so do not bend them needlessly over sharp edges. After fitting it is usually worth unifying the whole interior with a light flattening coat so that the surface does not look unevenly glossy.

Who the set is for

  • Modelers building the big Hornet in 1:32 with an open cockpit
  • Those who want a readable instrument panel without painting tiny details
  • Builders who prefer three-dimensional detail to flat photo-etch
  • More experienced modelers used to precise work with tweezers

This is not an aircraft model but an add-on set for the interior. The kit, paints and glue are not included in the package.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

Yes, briefly. The element is soaked for about fifteen seconds in lukewarm water and slid off the backing paper into place, where it holds on gloss varnish. Do not use a decal softener or setter at all, they would attack the printed resin. The procedure follows the instructions supplied with the set.

In most cases yes, as far as the instrument panel and the side consoles go. Compared with photo-etch, a 3D decal has both color and relief straight from production, so painting the small elements is no longer needed.

No. It is purely a set of interior decals; the kit has to be bought separately.

The designation in the name refers to a narrower scope than the full version. Check the exact list of covered surfaces on the box of the set.

For the Academy kit in 1:32 scale. The plastic parts of the basic model are not included in the package.

Last seen

1:32 F/A-18A++ 3D-Printed & coloured Interior on decal paper (Academy) (Small version)-25 %Stock ClearanceFavorite
Quinta StudioQDS321111:32

1:32 F/A-18A++ 3D-Printed & coloured Interior on decal paper (Academy) (Small version)

Quinta Studio 1:32 F/A-18A++ 3D interior decals are a pre-colored 3D set on decal paper that replaces hand painting of the instrument panel and the cockpit side consoles. Intended for the Academy kit.
12 leftof 15
18.76 €14.08 € You save 4.68 €
MASTERAM720211:72

1:72 Hawker Hunter - Pitot Tube

A turned metal pitot tube for a model of the Hawker Hunter in 1:72 scale from the Polish manufacturer MASTER. A precise replacement part, not a kit.
In stock
4.76 €
New WareNWAM00901:32

1:32 L-19/O-1 Bird Dog BASIC kabuki masks

New Ware L-19/O-1 Bird Dog BASIC masks 1:32 is a set of accurately shaped painting masks (kabuki) for the cabin glazing of a model of the Bird Dog observation and liaison aircraft.
In stock
5.96 €
1:72 WW II U.S Propaganda posters (69 posters)
-20 %
Favorite
Black Dog modelBDP720041:72

1:72 WW II U.S Propaganda posters (69 posters)

1:72 American period posters of the Second World War, 69 pieces are printed paper sheets with miniature posters for scenes in 1:72 scale.
In stock
5.56 €4.45 € You save 1.11 €
MiniartMA354821:35

1:35 RAUPENSCHLEPPER OST RSO/01. LATE PROD

An injection-molded plastic kit of the Raupenschlepper Ost RSO/01 (late production) in 1:35 scale from the maker MiniArt: the German tracked tractor of the Eastern Front.
In stock
37.16 €
Mettalic DetailsMDP480161:48

1:48 Blackburn Buccaneer Seat belts

1:48 Blackburn Buccaneer Seat belts rounds the tandem cabin of the British strike aircraft out with a safety harness in 1:48 scale.
In stock
8.36 €
1:72 Savoia-Marchetti SM.79 exterior-25 %Stock ClearanceFavorite
EduardED727371:72

1:72 Savoia-Marchetti SM.79 exterior

1:72 Savoia-Marchetti SM.79 exterior is an Eduard photo-etched set concentrating on the external details of a model of the Italian three-engine aircraft in 1:72 scale.
2 leftof 3
16.40 €12.32 € You save 4.08 €
1:35 Britisah Fuel Can (2 gal)
-20 %
Favorite
Firma4949A028/351:35

1:35 Britisah Fuel Can (2 gal)

An accessory in 1:35 scale: a British two-gallon fuel can. A small detail for vehicle models and for a diorama.
In stock
5.96 €4.77 € You save 1.19 €
ŘOP o.s.F1000/0471:1000

1:1000 MJ-S 29 ,,Svah,,

MJ-S 29 Svah 1:1000 is a miniature model of a Czechoslovak infantry blockhouse in 1:1000 scale. A small kit model for collectors of fortifications.
In stock
4.36 €
ŘOP o.s.S700/0571:700

1:700 R 3-7 Germany 1933

R 3-7 Germany 1933 is a resin kit of early German minesweeping boats (Räumboote) in 1:700 scale from ROP o.s. Intended for experienced modelers.
In stock
15.16 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.