Cut masks 1:32 for the single-seat Fiat G.50 Freccia fighter from Special Mask. A pre-cut aid for painting the glazing and other areas of the model, not a kit.
Responsibility details are not available.
A set of self-adhesive, pre-cut masks in 1:32 scale for a model of the Italian single-seat Fiat G.50 fighter, nicknamed Freccia, meaning arrow. It is a painting aid, not a model: the masks are transferred onto a finished, cured coat, oversprayed and lifted once dry. The result is a straight, sharply bounded line that is hard to reach by masking by hand.
In 1:32 scale the cockpit is large and it is the first place a viewer's eye goes. An uneven frame or a blurred edge spoils an otherwise handsome build. A pre-cut mask also holds a constant frame width over its whole length, which hand-cut tape practically never allows, and it saves an hour or more of preparation on every model.
Lift the mask off the sheet with sharp tweezers and seat it dry, without sliding it over the surface. Press the edges down with a toothpick, above all in the corners and over any bulges. Spray in several thin coats, never one heavy one. Once dry, take the mask off slowly and at a shallow angle back over itself, not straight up. Seal any unused sheet in a bag so that the adhesive does not pick up dust, and keep the offcuts for later touch-ups.
The package contains masks only. The model, paints and glue are not part of it, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
