1:32 Ju 87B-2/R-2 3D-Printed & coloured Interior on decal paper (Trumpeter)

1:32 Ju 87B-2/R-2 3D-Printed & coloured Interior on decal paper (Trumpeter)

26.68 €
Add to Cart

1:32 Ju 87B-2/R-2 3D-Printed & coloured Interior on decal paper (Trumpeter)

1:32 Ju 87B-2/R-2 3D printed colored interior on decal paper is a Quinta Studio accessory set for the Trumpeter kit. It is not a model of the aircraft but an interior detail.

Scale1:32
Manufacturer Quinta Studio
Product EAN5591111000009

Responsibility details are not available.

35.56 € 26.68 €
22.05 € without VAT
−25 % You save 8.88 €
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Ju 87B-2/R-2 in 1:32 scale — a 3D printed colored interior

The Quinta Studio set is 3D printed directly onto decal paper and is supplied already painted. These are not resin parts for gluing but a decal with a real thickness and a raised relief, which is applied by the wet method. The result is legible dials, raised levers and stitched seats without a single stroke of a brush. The set is cut for the Trumpeter kit in 1:32 scale.

The real subject

The Junkers Ju 87 was a German two-seat dive bomber of the Second World War, recognizable by its inverted gull wing and by fixed landing gear in aerodynamic fairings. The B-2 version was the main production form with a more powerful engine, while the R-2 variant differed from it in a modification for longer range, that is in additional tanks. The cockpit is continuous, with the pilot's and the rear gunner's stations under one long glazing, so it is very clearly visible with the canopy closed as well as open. That is exactly why a detailed interior pays off in this scale.

How the set is applied

First spray the cockpit area with a dark base color, so that the plastic does not show through the thin layer. Cut the individual elements out with a sharp scalpel, soak them briefly in warm water and slide them into place, and tune the exact position with a brush loaded with water. A decal softener and a setting solution do not belong here, as their chemistry would attack the printed resin and ruin the element. Only press the element down with a soft brush and do not run over it, otherwise smearing or tearing of the relief is a risk. On curved surfaces proceed in two stages with drying in between. Even the finished interior out with matte varnish, and a drop of gloss varnish imitating glass will help the dials. On this subject it is best to leave the long cockpit glazing at least partly open, so that the work is visible.

Who the set is for

  • Builders in the large 1:32 scale who want a rich interior without painting by hand.
  • Modelers who do not like working with resin or photo-etched metal.
  • Anyone interested in German equipment of the Second World War in 1:32.
  • Those who build a model with the cockpit glazing open.

It is an accessory set, not a model. The kit, paints and glue are not included in the package.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

By the wet method like a decal. Cut the element out, soak it in warm water and slide it into place. Nothing is glued or sanded.

Not as a classic thin decal does. A decal softener and a setting solution do not belong here, as their chemistry would attack the printed resin.

It is not intended for that. The set is cut for a particular kit, and on other kits the dimensions need not match.

The set is colored already. It is enough to spray the surface underneath with a dark color, so that the plastic does not show through, and to even the whole out with matte varnish at the end.

Last seen

1:32 Ju 87B-2/R-2 3D-Printed & coloured Interior on decal paper (Trumpeter)-25 %Stock ClearanceFavorite
Quinta StudioQD320901:32

1:32 Ju 87B-2/R-2 3D-Printed & coloured Interior on decal paper (Trumpeter)

1:32 Ju 87B-2/R-2 3D printed colored interior on decal paper is a Quinta Studio accessory set for the Trumpeter kit. It is not a model of the aircraft but an interior detail.
7 leftof 10
35.56 €26.68 € You save 8.88 €
Quinta StudioQD721281:72

1:72 Su-34 3D-Printed & coloured Interior on decal paper (Zvezda/italeri)

A color three-dimensional cockpit interior for a Su-34 model in 1:72 scale. It is applied the wet way and is shaped for the Zvezda and Italeri kits.
In stock
8.36 €
Quinta StudioQD321131:32

1:32 PZL P.11c 3D-Printed & coloured Interior on decal paper (IBG model)

A colored 3D printed interior for a model of the PZL P.11c fighter in 1:32 scale from IBG. The elements are soaked briefly in lukewarm water and slid off the backing paper.
In stock
16.36 €
MAiMMAIM352461:35

1:35 Survivors! w/M-16 Rifle - "Come over here!"

A resin collector figure, Survivors! with an M-16 rifle , in 1:35 scale from MAiM. A genre post-apocalyptic character to glue and paint.
In stock
12.76 €
MAiMMAIM352481:35

1:35 Survivors! w/Rucksack and M-4 Rifle

A resin collector figure, Survivors! with a rucksack and an M-4 rifle , in 1:35 scale from MAiM. A genre post-apocalyptic character to glue and paint.
In stock
13.96 €
Art ScaleASKD480601:48

1:48 P-51B/C Mustangs part 2 - Over Europe in foreign services

1:48 decals with three B version Mustangs that ended up in German, Swedish and Swiss hands.
In stock
11.96 €
Abrex143ABX-015XD011:43

1:43 Škoda Superb II Combi (2009) - AAA Taxi

The Skoda Superb II Combi of 2009 in the AAA Taxi form, 1:43 scale, is a finished collector's model of the Abrex marque. It is not a kit – the model is assembled and painted at the factory.
In stock
59.80 €
Master ClubMCF350331:35

1:35 Russian Special Forces Soldier #3 - Resin Figure

Master Club 1:35 Russian special forces soldier no. 3 is a resin figure kit for experienced modelers in 1:35 scale.
In stock
11.96 €
MAiMMAIM352311:35

1:35 Asian Hooker "me love you long time"

A resin collector figure of a female character in pin-up style, Asian Beauty , in 1:35 scale from MAiM. Meant to be glued and painted.
In stock
13.96 €
VallejoVAL74614

Surface Primer IDF Israeli Sand Grey 61-73 FS30372

A gray-sand base coat of the Israeli army, the period 1961 to 1973, with a reference to the FS 30372 standard in the name itself. A volume of 200 ml.
In stock
13.96 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.