1:32 MiG-21 radio altitude sensors early v.

Quickboost 1:32 MiG-21 radio altitude sensors early v. is a small resin set of radio altimeter antennas in the form of the early versions, intended for a plastic MiG-21 kit.

Scale1:32
Manufacturer Aires/Quickboost
Product EAN8591111766029

Responsibility details are not available.

4.76 €
3.93 € without VAT
3 pcs in stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Quickboost 1:32 MiG-21 radio altitude sensors early v. — resin radio altimeter antennas

A small detail set in cast resin in 1:32 scale from the Quickboost brand, which is made by the Czech company Aires. It replaces the radio altimeter antennas on the underside of the fuselage of the MiG-21 fighter in the form corresponding to the early versions. It is not an aircraft kit, but a small accessory for a model under way.

What the set solves

The radio altimeter antennas are thin moldings under the fuselage which cannot be cast finely enough in injection-molded plastic — because of the mold they are always thicker than they should be, and they are often damaged as well when cut off the sprue. A resin casting can render them in a realistic thickness and with a crisp outline. In 1:32 scale they are clearly visible under the fuselage, so a small replacement shows in the result. The set is tied to the form of the early MiG-21 versions; later machines had antennas of a different shape and arrangement, for which a separate variant of the set exists.

Tips for working it

Wash the parts in warm soapy water because of the mold release agent. Cut them off the casting block with a sharp new knife, ideally on a soft surface — they are brittle and thin, so they snap if handled roughly. Cut the original plastic antennas off the kit and sand the surface smooth. They are glued with cyanoacrylate glue, and a really small drop applied with a toothpick is enough. We recommend gluing the antennas on only after the underside of the fuselage has been sprayed, so that they are not damaged during handling and masking. Do the sanding wet and with respiratory protection.

Who the set is for

  • Builders of MiG-21 models in 1:32 scale
  • Modelers who build the early version of the machine and watch out for its differences
  • Display case and competition models, where small details are judged
  • A quick improvement with a minimum of work

The accessory is supplied unassembled and unpainted. The basic kit, glue and paints are not included in the package, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

It is not. The package contains only the small resin antenna parts. The plastic MiG-21 kit has to be owned or bought separately.

The shape and arrangement of the radio altimeter antennas changed during MiG-21 production. This set corresponds to the early machines; the late one has its own variant.

Best of all only after the underside of the fuselage has been sprayed. They are thin and break off easily during masking or handling.

Cyanoacrylate glue, and a very small drop applied with a toothpick is enough. Cement for plastic does not dissolve resin.

Last seen

Aires/QuickboostQB322171:32

1:32 MiG-21 radio altitude sensors early v.

Quickboost 1:32 MiG-21 radio altitude sensors early v. is a small resin set of radio altimeter antennas in the form of the early versions, intended for a plastic MiG-21 kit.
In stock
4.76 €
Kits-WorldKWM4810451:48

1:48 MiG-21 PF - Canopy and Wheel Masks (for Eduard 8236 kit)

Pre-cut masking stencils for the cockpit canopy frames and for the wheels for a model of the interceptor MiG-21 PF in 1:48 scale.
In stock
7.96 €
AberABR250101:25

1:25 Fenders for Panther G/Jagdpanther

Fenders for Panther G/Jagdpanther (1:25, Aber) is a photo-etched metal detail set of fenders for models of the Panther Ausf.G medium tank and the Jagdpanther tank destroyer. It is not a model but an accessory for raising the fidelity of a build.
In stock
17 €
HaulerHLX482101:48

1:48 Armored JEEP (82nd Airborne Div.) (HASEGAWA)

The Hauler 1:48 armored jeep of the 82nd Airborne Division photo-etched set completes the plastic model of the light cross-country vehicle with added plates. It is an accessory, not a kit.
In stock
14 €
Quinta StudioQD322331:32

1:32 Boeing B-17E/F Pilot's cockpit. 3D-Printed & coloured Interior on decal paper (HK models)

Quinta Studio B-17E/F pilot's cockpit 1:32 is a colored relief 3D decal of the interior for a model of the Boeing B-17 Flying Fortress from HK Models. It is not a model, but a detail accessory.
In stock
34.36 €
AviatticATTRES0331:32

1:32 "Stripped" rudder for Fokker DR.I and DVI

Aviattic 1:32 stripped rudder for the Fokker Dr.I and D.VI : an accessory capturing a rudder with its fabric covering removed, a striking element for dioramas and vignettes from behind the lines of the Great War.
In stock
20.36 €
AmercomAME85401:64

1:64 1952 Seagrave '70th Anniversary Series' USA

Seagrave 70th Anniversary Series USA 1952 is a finished metal collector model of an American fire appliance in 1:64 scale from Amercom.
In stock
9.16 €
Kovozávody ProstějovKPEX0451:72

1:72 Focke Wulf Fw 109A ( Mask for canopy and wheels)

A set of masks for the canopy glazing and for the wheels of the Focke-Wulf Fw 190A model in 1:72 scale.
In stock
4.76 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.