20% OFF SELECTED BRANDS! EDUARD, KINETIC, SPECIAL HOBBY, CMK & more
1:32 OV-10A (USN version) 3D-Printed & coloured Interior on decal paper (KittyHawk)

1:32 OV-10A (USN version) 3D-Printed & coloured Interior on decal paper (KittyHawk)

25.48 €
Add to Cart

1:32 OV-10A (USN version) 3D-Printed & coloured Interior on decal paper (KittyHawk)

1:32 OV-10A in the Navy version, colored 3D interior decals from Quinta Studio are a decal accessory to a plastic kit, which replaces flat inner surfaces with detail in relief. Intended for the Kitty Hawk kit.

Scale1:32
Manufacturer Quinta Studio
Product EAN5591111000009

Responsibility details are not available.

33.96 € 25.48 €
21.06 € without VAT
−25 % You save 8.48 €
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Colored 3D interior decals for the OV-10A in 1:32 scale

The Quinta Studio set is an accessory to a plastic model, not a standalone kit. It contains 3D-printed and already painted decals on decal paper, which are applied to the parts of the model and give them three-dimensional detail. The name specifies the set as the variant for the Navy form of the machine. Check the extent of the set and the contents of the package on the box. The target kit is Kitty Hawk.

What the set is for

The OV-10A Bronco is a twin-engined turboprop aircraft with a pair of tail booms, intended for reconnaissance and light support. The cockpit is glazed over a large area and in 1:32 scale you can see well into it, so flat parts out of the kit are conspicuous here. Colored 3D decals add relief and color at once and save painting small instruments and consoles.

How the set is applied

The base has to be smooth and coated with a gloss varnish; the element has no adhesive layer of its own and will not hold on a matte base. Cut the elements out as close as you can, soak them in lukewarm water for about fifteen seconds, move them into place with a soft brush and blot the excess water away. Then press the element down gently with a cotton swab. Do not use a decal softener or a decal fixer, as their chemicals attack the printed resin and ruin the element. Once dry, coat the interior with a matte varnish.

Who the set is for

  • Modelers building the OV-10A in the large 1:32 scale.
  • Those who want a three-dimensional interior without working with photo-etched parts.
  • Builders who dislike painting small instruments with a brush.
  • Modelers planning a model with a clearly visible glazed cockpit.

This is an accessory to a plastic kit, which the package does not contain. The model, paints, varnish and glue are not part of the set.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

It is not. This is a decal accessory to a plastic model, which the package does not contain.

The name specifies the set as the variant for the Navy form of the machine. Check the particular differences against other forms on the box.

A matte surface is microscopically broken up and air stays under the decal, which shows as a silvered edge. A gloss varnish prevents that.

It can, but most of the detail will then not be visible. It tells most on a model with the canopy open.

For the Kitty Hawk kit in 1:32 scale. The plastic parts of the basic model are not included in the package.

Last seen

1:32 OV-10A (USN version) 3D-Printed & coloured Interior on decal paper (KittyHawk)-25 %Stock ClearanceFavorite
Quinta StudioQD320781:32

1:32 OV-10A (USN version) 3D-Printed & coloured Interior on decal paper (KittyHawk)

1:32 OV-10A in the Navy version, colored 3D interior decals from Quinta Studio are a decal accessory to a plastic kit, which replaces flat inner surfaces with detail in relief. Intended for the Kitty Hawk kit.
2 left
33.96 €25.48 € You save 8.48 €
AvisBX720231:72

1:72 American Gyro AG-4 Crusader

The American Gyro AG-4 Crusader in 1:72 scale is an injection-molded plastic kit of a rare American twin-boom aircraft from Avis.
In stock
18.76 €
Yamamoto Model PartsYMPRIM11:24

1:24 Rims WORK MEISTER CR01 17 "+ ADAPTERS

The Work Meister CR01 wheel rims in the 17 inch version with adapters, 1:24 scale, from Yamamoto Model Parts are replacement wheels for car kits. It is not a car kit but an accessory to be installed in a model.
In stock
11.96 €
KK019

Kawasaki Ki-61 & Ki-100

In stock
1.96 €
Pilot ReplicasPR48P0061:48

1:48 Pilot Immersion suit Draken Viggen etc

A crew member in an immersion suit in 1:48 scale. A figure for scenes around the Swedish and Finnish jets of the Cold War.
In stock
11.96 €
1:72 DH-82A Tiger Moth Mk.II “Royal Navy”
-20 %
Favorite
Kovozávody ProstějovKPM04431:72

1:72 DH-82A Tiger Moth Mk.II “Royal Navy”

de Havilland DH-82A Tiger Moth Mk.II Royal Navy (1:72) is an injection-molded plastic kit of the classic British training biplane from Kovozavody Prostejov.
In stock
11.16 €8.93 € You save 2.23 €
ŘOP o.s.MNFDL720041:72

1:72 Bristol Blenheim Mk IV - Axis the Blenheims

Bristol Blenheim Mk.IV - Axis the Blenheims 1:72 is a set of waterslide decals with markings for the British bomber in the colors of the Axis countries and other operators.
In stock
7.96 €
GraupnerG1408/4

Napínací lak žlutý, 100ml

Graupner tautening dope, yellow, 100 ml — a colored tautening dope for the paper and fabric covering of flying models. It tautens the covering, stiffens it and colors it in one go.
In stock
10.36 €
BrengunBRL1441271:144

1:144 F-15E Vacu canopy (Revell kit)

1:144 F-15E vacuum-formed canopy is a clear replacement part for a kit you have already bought, not a model. Drawn film replaces the thick plastic canopy and opens up the view into the two-seat cockpit.
In stock
5.16 €
Plastruct PLT90743

Rectangular Strip (1 pcs) H-1,0mm W-1,5mm L-250mm

Plastruct rectangular profile 1.0 x 1.5 mm (length 250 mm) is a precisely extruded strip in white polystyrene for strips, small frames and stiffeners on models.
In stock
0.64 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.