1:32 Paint Masks Set Canopy And Roundels For Spitfire Mk.IXc Tamiya Kit #60319

1:32 Paint Masks Set Canopy And Roundels For Spitfire Mk.IXc Tamiya Kit #60319

21.16 €
Add to Cart

1:32 Paint Masks Set Canopy And Roundels For Spitfire Mk.IXc Tamiya Kit #60319

1:32 Paint Masks Set Canopy And Roundels For Spitfire Mk.IXc combines stencils for the cockpit glazing with stencils for the circular national insignia for a large model of the fighter.

Scale1:32
Manufacturer DN Models
Product EAN9891112375191

Responsibility details are not available.

21.16 €
17.49 € without VAT
1 pcs in stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

The canopy and the roundels for the Spitfire Mk.IXc

This item deals with two different jobs at once. First, covering the glazing, that is, the windscreen, the sliding canopy and the rear glazing, so that after spraying the frames stay colored and the glass clear. Second, the circular national insignia, which are sprayed in layers as concentric rings.

The real subject

The Mk.IX came about as a quick answer to the German fighter that the versions until then were no longer adequate against. A two-stage supercharged engine was built into the airframe, thanks to which the aircraft regained the advantage at greater altitudes, and the machine became one of the most numerously produced versions of the whole family. The letter c in the designation refers to the universal wing, which made it possible to change the mix of armament according to the task. The large scale does the subject a favor: the framing of the canopy is intricate and from close up every overrun of paint is noticeable.

Two procedures in one package

With the glazing, work with an absolutely clean surface and press the edges of the film with a toothpick into the engraved frame. Spray the shade of the cockpit interior first and only then the covering coat, so that the frame does not look translucent. The roundels call for the opposite logic: they are applied from the center outward, each ring separately, and between layers the paint has to cure, as otherwise it will peel off when the next part is repositioned. Patience here yields a clean concentric marking without steps.

Whom this combination will serve

  • large models of the British fighter in 1:32 scale
  • modelers bothered by the glossy edge of a decal
  • clean framing of the canopy without tracing by hand
  • display builds looked at from close up

The set is an accessory to a model; the aircraft itself is not in it.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

It is made up of concentric rings. Each one is applied separately and the previous layer has to be cured.

It refers to the universal wing, which allowed the mix of armament to be changed according to the task.

It pays off. Without the shade of the cockpit interior, the frame comes across as translucent after spraying.

It is not. This is a masking accessory; the airframe you obtain separately.

Last seen

DN ModelsDN32/827-0021:32

1:32 Paint Masks Set Canopy And Roundels For Spitfire Mk.IXc Tamiya Kit #60319

1:32 Paint Masks Set Canopy And Roundels For Spitfire Mk.IXc combines stencils for the cockpit glazing with stencils for the circular national insignia for a large model of the fighter.
In stock
21.16 €
1:35 JSDGF HMV Sagged Wheel set (for Finemolds 1:35 )-25 %Stock ClearanceFavorite
DEF ModelDW350661:35

1:35 JSDGF HMV Sagged Wheel set (for Finemolds 1:35 )

Resin replacement wheels with a loaded effect for a model of the Japanese HMV (High Mobility Vehicle) light off-road vehicle in 1:35 scale from DEF Model . The tires have a faithful bulge where they meet the road and replace the plastic parts from the kit. Made for the Finemolds kit.
Last one!of 3
19.96 €14.96 € You save 5 €
1:35 US MK.23 MTVR Sagged Wheel set (for Trumpeter 1:35 )-25 %Stock ClearanceFavorite
DEF ModelDW350491:35

1:35 US MK.23 MTVR Sagged Wheel set (for Trumpeter 1:35 )

A resin set of weighted wheels for the American MK.23 MTVR truck from the Trumpeter kit in 1:35 scale. The sagged tires imitate a heavy vehicle settling on the ground.
2 left
33.96 €25.48 € You save 8.48 €
J´s WorkPPA51091:72

Airbrush CAMO-MASKfor 1/72 T-90 MBT Camo Scheme

J's Work Airbrush CAMO-MASK T-90 MBT 1:72 is a set of self-adhesive masking stencils for spraying camouflage on a model of the Russian T-90 tank. It is not a model, it is an airbrush masking aid in 1:72 scale.
In stock
5.96 €
RYE FIELD MODELRM21161:35

1:35 Sherman VC Firefly - Upgrade Solution Series (for RFM 5153 and 5038 Kits)

RYE FIELD MODEL 1:35 Sherman VC Firefly, Upgrade Solution Series is a set of accessories for refining the plastic kit of the British Sherman Firefly tank in 1:35 scale.
In stock
27.16 €
OmaskOMK7481331:48

1:48 Hawker Hurricane Mk.I wheel bay plugs (for Airfix)

Omask 1:48 Hawker Hurricane Mk.I, landing gear bay plugs (for the Airfix kit) are flexible foam plugs that seal the landing gear bays while the model is being sprayed and protect their painted interior. It is not a kit but a masking accessory.
In stock
3.20 €
AirscalePE24 GUS1:24

1:24 Messerschmitt Me109G Instrument Panel PE & Decal for Trumpeter kits

A detail set of the instrument panel of the Messerschmitt Me 109G in 1:24 scale from Airscale . It combines multi-layer photo-etched metal with printed dial decals and replaces the panel from the kit. A cockpit accessory for experienced modelers, not an airplane model. It fits the Trumpeter kit.
In stock
16.76 €
1:35 Pick up truck Type 2 Sagged Wheel set 1 (for Meng VS004 1:35 )-25 %Stock ClearanceFavorite
DEF ModelDW350511:35

1:35 Pick up truck Type 2 Sagged Wheel set 1 (for Meng VS004 1:35 )

A resin set of weighted wheels for a civilian pickup truck of type 2 (set 1) in 1:35 scale. The sagged tires give the model a realistic, loaded look. Intended for the Meng VS004 kit.
3 leftof 4
19.16 €14.36 € You save 4.80 €
1:35 Proof Canvas Cover for Canadian Main Battle Tank Leopard C2 MEXAS-25 %Stock ClearanceFavorite
MengSPS-0661:35

1:35 Proof Canvas Cover for Canadian Main Battle Tank Leopard C2 MEXAS

An accessory in 1:35 scale that imitates the cover tarpaulin of the Canadian Leopard C2 MEXAS tank. Modeled folds give the finished model signs of service.
2 left
59.96 €44.96 € You save 15 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.