Eduard SPACE Remove Before Flight in the white variant, 1:32 scale. A set of 3D printed and pre-colored tags on decal paper, which are lifted off the moistened backing paper.
Responsibility details are not available.
This item is not a model but a universal accessory for aircraft models in 1:32 scale. It contains tags with the inscription Remove Before Flight, that is the warning streamers which on real aircraft are hung on covers, safety pins and locking devices and have to be removed before takeoff. On a model it is a small item that gives a scene scale and life, above all on a machine displayed on the ground. The details are 3D printed, are supplied already in color and are carried on decal backings.
Eduard carries this set in two color forms. This item is the white variant, and a black one is sold alongside it. Both are separate products and differ in the color treatment of the tags. Choose according to the form you need for the given type of aircraft and period.
Follow the manufacturer's instructions. Spray the place the tag is to go and coat it with gloss varnish. Cut the detail out as close as possible and moisten only the backing paper under it, until the element comes free. Lift it with tweezers, shape it along the edge of a cover or a tube and fix it with white PVA glue. Do not use a decal softener, as its chemistry would damage the thin color layer. Once dry, seal it with a matte coat. If you want to leave a tag hanging freely, bear in mind that the decal backing is flat and has to be bent carefully.
This is an accessory set. The model, paints and clear coats are not included in the package, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
