1:32 Su-30SM 3D-Printed & coloured Interior on decal paper (conversion for Trumpeter Su-30MKK)

1:32 Su-30SM 3D-Printed & coloured Interior on decal paper (conversion for Trumpeter Su-30MKK)

43.76 €
Add to Cart

1:32 Su-30SM 3D-Printed & coloured Interior on decal paper (conversion for Trumpeter Su-30MKK)

1:32 Su-30SM 3D printed colored interior on decal paper is a Quinta Studio conversion accessory set that reworks the interior of the Trumpeter Su-30MKK kit. It is not an aircraft model.

Scale1:32
Manufacturer Quinta Studio
Product EAN5591111000009

Responsibility details are not available.

58.36 € 43.76 €
36.17 € without VAT
−25 % You save 14.60 €
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Su-30SM in 1:32 scale, a 3D printed colored interior

The Quinta Studio set is 3D printed directly onto decal paper and is supplied already painted. These are not resin parts to be glued but a decal with a real thickness and three-dimensional relief, applied the wet way. This item is a conversion: it is meant to turn the interior of the Trumpeter kit in the Su-30MKK version into the interior of the Su-30SM version. In extent it is among the most comprehensive sets Quinta makes for two-seat machines. Note that a reduced version of the same set marked as Small version is made as well; the exact designation tells them apart, so check which variant you want when ordering.

The real subject

The Su-30SM is a two-seat multirole combat version of the Su-27 family, with tandem seating, canards and thrust vectoring. Against the export Su-30MKK version it differs in its avionics and in the equipment of both cockpits, which is exactly why the set exists as a conversion rather than as a plain interior. The cockpits have large-area displays, which is an ideal subject for a three-dimensional color decal: the front panels, the side consoles and the seats are all well visible in this scale.

How the set is applied

Spray the cockpit area with a dark base color first. Cut the elements out with a sharp scalpel, soak them in warm water and slide them into place; the position can be adjusted with a brush and water and the excess blotted away with a cotton swab. Do not use a decal softener or a setting solution: the 3D printed layer is thicker than an ordinary decal and their chemistry would damage it; on no account run a brush over the surface, as the relief would smear or tear. On curved areas work in two stages with drying in between. Coat the finished interior with a matte varnish and bring the display areas to life with a drop of gloss varnish.

Who the set is for

  • Builders who want to make a particular Su-30SM version out of the Trumpeter kit.
  • Modelers in the large 1:32 scale who want legible modern cockpits with no hand painting.
  • Anyone interested in modern two-seat combat aircraft.
  • Those who build with the canopies open.

This is an accessory set, not a model. The kit, paints and glue are not included in the package.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

It is meant to turn the interior of the kit in the Su-30MKK version into the interior of the Su-30SM version. The two versions differ in the equipment of their cockpits, so it is not a plain interior accessory.

The wet way, like a decal. The element is cut out, soaked in warm water and slid into place. Nothing is glued or sanded.

No, the manufacturer forbids it. Do not use a decal softener or a setting solution, because the printed 3D layer is thicker than an ordinary decal and their chemistry would damage it.

In extent. Both variants are made and the exact designation in the name tells them apart, so check which of them you want before ordering.

Last seen

1:32 Su-30SM 3D-Printed & coloured Interior on decal paper (conversion for Trumpeter Su-30MKK)-25 %Stock ClearanceFavorite
Quinta StudioQD320951:32

1:32 Su-30SM 3D-Printed & coloured Interior on decal paper (conversion for Trumpeter Su-30MKK)

1:32 Su-30SM 3D printed colored interior on decal paper is a Quinta Studio conversion accessory set that reworks the interior of the Trumpeter Su-30MKK kit. It is not an aircraft model.
14 left
58.36 €43.76 € You save 14.60 €
Quinta StudioQD484661:48

1:48 Macchi MC.200 Saetta (Early) 3D-Printed & coloured Interior on decal paper (Italeri)

1:48 Macchi MC.200 Saetta (Early), three-dimensionally printed and colored interior from Quinta Studio is the interior fitting for a model of the early form of the Italian fighter. Intended for the Italeri kit.
In stock
14.76 €
Dynamo-ModelsDNMA90530-25

30th Waffen Grenadier Division Of The SS Plaque 25mm

30th Waffen Grenadier Division Of The SS Plaque 25mm is a diorama plaque with the badge of the unit with the order number 30. An accessory to a base, not a model.
In stock
2.36 €
Voyager ModelPE354081:35

1:35 WWII German Panzer IV ausf G 20mm Flakpanzer IV

A photo-etched set for a model of the German anti-aircraft version of the Panzer IV tank with 20 mm armament in 1:35 scale. The scope of the parts is given in the manufacturer's instructions.
In stock
27.56 €
Armour ModelsA35DS0411:35

1:35 Šípové kolesá pre US GMC CCKW (12kol)

Armour Models 1:35 chevron pattern wheels for the US GMC CCKW (12 wheels) is a resin set of twelve wheels for models of the GMC CCKW truck in 1:35 scale.
In stock
11.96 €
Dead DesignNM320761:32

1:32 F-4C/D Phantom II National Insignias Tamiya

A set of stencils for spraying the national insignia and markings on the F-4C/D Phantom II in 1:32 scale replaces decals with sprayed paint.
In stock
9.16 €
Quinta StudioQD485101:48

1:48 P-47 D-30 3D-Printed & coloured Interior on decal paper (Miniart)

Quinta Studio 1:48 P-47D-30 Thunderbolt 3D interior decal is a color 3D cockpit decal on backing decal paper for realistic detailing of the cockpit without photo-etch. Intended for the MiniArt kit.
In stock
14.76 €
PolákPOL9813

Lesní porost - varianta C 27,5x20,5 cm

Forest growth - variant C (27.5x20.5 cm) is ready-made scenic foliage from the Czech manufacturer Polak for creating forest undergrowth and greenery on dioramas and layouts.
In stock
18.76 €
PolákPOL9812

Lesní porost - varianta B 27,5x20,5 cm

Forest growth - variant B (27.5x20.5 cm) is ready-made scenic foliage from the Czech manufacturer Polak for quickly creating forest undergrowth and greenery on dioramas and layouts.
In stock
18.76 €
HatakaHTK-C056

European I Green (FS34092, ANA 612)

The dark green modeling paint European I Green from the Hataka Orange Line range, listed under the numbers FS 34092 and ANA 612.
In stock
1.56 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.