The resin set 1:200 Lockheed L1011, extended flaps and early RB211-22 engines for a model of the three-engine wide-body airliner. Intended for the Hasegawa kit.
Responsibility details are not available.
An accessory set in resin in 1:200 scale for a model of the wide-body Lockheed L1011 airliner. It holds replacement parts, not a whole model: landing flaps in the extended position and engines of the RB211-22 series in their early form. It is by the engine nacelles that the individual series of this aircraft are told apart on a model, so the choice between the early and the late variant is not a cosmetic trifle but a decision that has to match the machine being modeled. The target kit is Hasegawa.
The Lockheed L1011 was an American wide-body airliner with three turbofan engines: two under the wing and one in the rear of the fuselage, fed by a curved duct under the root of the fin. It was powered exclusively by British Rolls-Royce engines of the RB211 series, and the aircraft became known for its advanced avionics as well as its quiet, comfortable operation. It was used on long-haul and medium routes and is today a popular subject among collectors of airliners.
Wash the resin in warm soapy water before painting, or the paint will not adhere. Cut the casting blocks off and sand the remnants down under water because of the dust. Make the joints with super glue, and for the nacelles preferably the gel version, so that there is time to line them up. Before gluing the flaps, check the angle of extension and the match of both halves of the wing dry. Depending on which machine you are building, confirm beforehand that you need the early form of the engines.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!