A diorama corner with a wooden gate in 1:35 joins a masonry structure with a wooden entrance. It offers a scene with two different materials on one piece.
Responsibility details are not available.
A diorama display in which the corner of a building meets a wooden gate. For a modeler it is interesting above all because it offers two entirely different surfaces on a small area, masonry and wood, and each of them is painted differently. The terrain is ready and the work concentrates on the surface finish.
A corner is a classic diorama element, because by itself it suggests a street and a town without your having to build a whole building. The gate also adds a story: it divides the space into inside and outside and the viewer automatically imagines what is behind it. The scene therefore works well with a figure standing by the gate or walking through it, and with a smaller vehicle parked by the wall.
Start the wood with a mid-brown base and only then add the drawing of the grain in a darker color pulled with a brush along the grain. Aged wood turns gray, so a light pass of gray with a dry brush moves it decades further on. Hint at the ironwork and the hinges with dark steel and let a thin rust trace run down below them; it is exactly this detail that brings the gate to life. The masonry, on the other hand, is built from a darker base toward lighter brick or plaster, with the joints left showing through. Dust joins the lower areas of both materials into one place.
The casting is supplied untreated; the paints, the patina and any addition of figures remain entirely in your hands.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
