A complete fit-out for the Italian heavy truck Lancia 3Ro including a spare wheel, the tread pattern marked as type 1. The castings replace the wheels from the original kit, 1:35 scale.
Responsibility details are not available.
In the Second World War the Lancia 3Ro was the backbone of Italian freight transport. A diesel engine let it tow guns and carry supplies and men, and in North Africa it also saw conversion into a carrier for a 90 mm anti-aircraft gun. It was built from the middle of the thirties and in civilian service it lasted long after the war, so it still belonged to Italian roads in the fifties.
The tires of heavy vehicles differed by supplier and by where the machine was to run. The maker therefore offers two patterns and leaves the choice to the modeler; the first of them covers one of the documented shapes. If you are building a car to one particular photograph, compare the design in the photograph with the casting beforehand.
The set covers the wheels on both axles and adds a spare piece. The rear axle on this vehicle was doubled, so it is at the rear that the difference against the parts from the kit shows best: a pair of tires side by side displays the design at double the width and any inaccuracy there would be impossible to miss.
The holes in the hubs of castings tend to be slightly narrower, so they can be adjusted to one particular stub. Widen them with a small drill and the wheel will seat without the pressure that would crack the thin edge of the rim. It also pays to assemble the whole fit-out dry once and only then decide which way the design will be turned: on doubled wheels the pattern appears twice side by side and a mismatched turn leaps to the eye.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!